This website uses cookies to improve service quality. You will find more information about cookies on the privacy policy page.

CERTAL® SPC, Al rolled plate



Precision rolled plate UNIDAL® made form alloy EN AW 7019 (AlZn4Mg2), finely milled on both sides and covered with protective film, is characterized by a narrow tolerance of flatness and thickness and has only relatively low residual stresses. The good anodizing and welding capability opens up a wide range of applications for this product.

Related Standards



Electrical conductivity σel

1.80E+7 - 2.20E+7 S/m at 20 °C


Density ρ

2.76 g/cm³ at 20 °C


Elastic modulus E

72 GPa at 20 °C

Elongation A50 A50

2 - 7 % at 20 °C

Hardness, HBW HBW

140 - 160 [-] at 20 °C

Test method: 2.5/62.5

Tensile strength Rm

490 - 530 MPa at 20 °C

Yield strength Rp0.2 Rp0.2

430 - 460 MPa at 20 °C


Coefficient of thermal expansion α

2.36E-5 1/K at 20 °C

Specific heat capacity cp

873 J/(kg·K) at 20 °C

Thermal conductivity λ

120 - 150 W/(m·K) at 20 °C

Technological properties


Heat treatable alloy

Processing history

Temper: T651, T652

This material data has been provided by Gleich Aluminum.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.