General
Property | Temperature | Value | Comment |
---|---|---|---|
Bulk density | 23.0 °C | 450 g/cm³ Show Supplier Material materials with Bulk density of 450 g/cm³ | ASTM D1525 |
Density | 23.0 °C | 0.94 g/cm³ Show Supplier Material materials with Density of 0.94 g/cm³ | ASTM D1505 |
Mechanical
Property | Temperature | Value | Comment |
---|---|---|---|
Elongation | 23.0 °C | 250 - 950 % Show Supplier Material materials with Elongation of 250 - 950 % | ASTM D638 |
Flexural modulus | 23.0 °C | 0.25 - 0.75 GPa Show Supplier Material materials with Flexural modulus of 0.25 - 0.75 GPa | ASTM D790 |
Hardness, Shore D | 23.0 °C | 57 [-] Show Supplier Material materials with Hardness, Shore D of 57 [-] | ASTM D2240 |
Impact strength, Izod notched, ASTM | 23.0 °C | 500 J/m Show Supplier Material materials with Impact strength, Izod notched, ASTM of 500 J/m | ASTM D256, Partial Break |
Tensile strength | 23.0 °C | 12.25 MPa Show Supplier Material materials with Tensile strength of 12.25 MPa | ASTM D638 |
Yield strength | 23.0 °C | 19.75 - 20 MPa Show Supplier Material materials with Yield strength of 19.75 - 20 MPa | ASTM D638 |
Thermal
Property | Value | Comment |
---|---|---|
Vicat softening temperature | 118 °C Show Supplier Material materials with Vicat softening temperature of 118 °C | ASTM D1525 |
Rheological Properties
Property | Value | Comment |
---|---|---|
Melt mass-flow rate | 4 g/10min Show Supplier Material materials with Melt mass-flow rate of 4 g/10min | ASTM D1238, 190°C/2.16kg |
Technological properties
Property | ||
---|---|---|
Application areas | Due to its combination of mechanical properties, ESCR resistance & fluidity, GREENETHENE G-3904U is suggested for the production of Playground equipment, manholes, storage containers, chemical & Oil tanks. | |
Certifications | List of Constituents of Polyethylene in Contact with Foodstuffs, Pharmaceuticals and Drinking Water: IS 10141:2001, IS 12701:1996 | |
Processing methods | Compression molded & rotomolded |