PA12 resins YM50

Want to keep this datasheet? Save it now in your required format

Description

High flow, easy demoulding, suitable for very thin-walled products,low specific weight & feather-like flying ability, high resilience, creep resistance and fatigue resistance, outstanding toughness and tensile strength at low temperature

This material data has been provided by Global Star Trading (HK) Co. Ltd.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

Properties

General

PropertyTemperatureValueComment

Density

23.0 °C

1.02 g/cm³

Show Supplier Material materials with Density of 1.02 g/cm³

ISO1183

Mechanical

PropertyTemperatureValueComment

Elongation

23.0 °C

300 %

Show Supplier Material materials with Elongation of 300 %

ISO527

Flexural modulus

23.0 °C

0.28 GPa

Show Supplier Material materials with Flexural modulus of 0.28 GPa

ISO178

Flexural strength

23.0 °C

13 MPa

Show Supplier Material materials with Flexural strength of 13 MPa

ISO178

Hardness, Shore D

23.0 °C

58 - 60 [-]

Show Supplier Material materials with Hardness, Shore D of 58 - 60 [-]

ISO868

Impact strength, Charpy notched

-30.0 °C

35 kJ/m²

Show Supplier Material materials with Impact strength, Charpy notched of 35 kJ/m²

ISO179

23.0 °C

60 kJ/m²

Show Supplier Material materials with Impact strength, Charpy notched of 60 kJ/m²

ISO179

Tensile strength

23.0 °C

40 MPa

Show Supplier Material materials with Tensile strength of 40 MPa

ISO527

Yield strength

23.0 °C

18 MPa

Show Supplier Material materials with Yield strength of 18 MPa

ISO527

Impact strength, Charpy unnotched

ISO179, No break @-30, 23°C

Technological properties

Property
Application areas

Nylon badmintion, shuttlecock

Processing methods

Drying Temperature: 75-80°C, Drying Time: 3-4 hr, Rear Temperature: 180°C, Middle Temperature: 250°C, Front Temperature: 250°C, Nozzle Temperature: 230°C, Mold Temperature: 60-80°C, Injection Pressure: 70-100 MPa