Properties
General
| Property | Temperature | Value |
|---|---|---|
Density | 23.0 °C | 8.4 g/cm³ Show Supplier Material materials with Density of 8.4 g/cm³ |
Mechanical
| Property | Temperature | Value | Comment |
|---|---|---|---|
Impact strength, Charpy notched | 23.0 °C | 1500 kJ/m² Show Supplier Material materials with Impact strength, Charpy notched of 1500 kJ/m² | max. |
Thermal
| Property | Value |
|---|---|
Melting point | 1330 - 1380 °C Show Supplier Material materials with Melting point of 1330 - 1380 °C |
Chemical properties
| Property | Value | Comment |
|---|---|---|
Aluminium | 0.6 - 1.5 % Show Supplier Material materials with Aluminium of 0.6 - 1.5 % | |
Boron | 6E-3 % Show Supplier Material materials with Boron of 6E-3 % | max. |
Carbon | 0.05 - 1 % Show Supplier Material materials with Carbon of 0.05 - 1 % | |
Chromium | 20 - 23 % Show Supplier Material materials with Chromium of 20 - 23 % | |
Cobalt | 10 - 13 % Show Supplier Material materials with Cobalt of 10 - 13 % | |
Copper | 0.5 % Show Supplier Material materials with Copper of 0.5 % | max. |
Iron | 2 % Show Supplier Material materials with Iron of 2 % | max. |
Manganese | 0.7 % Show Supplier Material materials with Manganese of 0.7 % | max. |
Molybdenum | 8 - 10 % Show Supplier Material materials with Molybdenum of 8 - 10 % | |
Phosphorus | 0.01 % Show Supplier Material materials with Phosphorus of 0.01 % | max. |
Silicon | 0.7 % Show Supplier Material materials with Silicon of 0.7 % | max. |
Sulfur | 8E-3 % Show Supplier Material materials with Sulfur of 8E-3 % | max. |
Titanium | 0.02 - 0.5 % Show Supplier Material materials with Titanium of 0.02 - 0.5 % |
Technological properties
| Property | ||
|---|---|---|
| Application areas | Alloy 617 is applied at high temperatures. Alloy 617 is used in air heaters, furnace components, beam pipes or high-temperature heat exchangers as well as in gas turbines and combustion chambers. | |
| Welding | Welding Rods: FM 617- 2.4627 Wire Electrodes: Covered Rod Electrodes: | |