General
Property | Temperature | Value |
---|---|---|
Density | 23.0 °C | 4.51 g/cm³ Show Supplier Material materials with Density of 4.51 g/cm³ |
Mechanical
Property | Temperature | Value | Comment |
---|---|---|---|
Elastic modulus | 23.0 °C | 105 GPa Show Supplier Material materials with Elastic modulus of 105 GPa | |
Elongation A50 | 23.0 °C | 18 % Show Supplier Material materials with Elongation A50 of 18 % | min. |
Hardness, Brinell | 23.0 °C | 170 [-] Show Supplier Material materials with Hardness, Brinell of 170 [-] | max. |
Tensile strength | 23.0 °C | 480 MPa Show Supplier Material materials with Tensile strength of 480 MPa | min |
Yield strength Rp0.2 | 23.0 °C | 345 MPa Show Supplier Material materials with Yield strength Rp0.2 of 345 MPa | min. |
Electrical
Property | Temperature | Value |
---|---|---|
Electrical resistivity | 23.0 °C | 5.2E-7 Ω·m Show Supplier Material materials with Electrical resistivity of 5.2E-7 Ω·m |
Chemical properties
Property | Value | Comment | |
---|---|---|---|
Carbon | 0.08 % Show Supplier Material materials with Carbon of 0.08 % | max. | |
Hydrogen | 0.02 % Show Supplier Material materials with Hydrogen of 0.02 % | max. | |
Iron | 0.03 % Show Supplier Material materials with Iron of 0.03 % | max. | |
Manganese | 0.2 - 0.4 % Show Supplier Material materials with Manganese of 0.2 - 0.4 % | ||
Nickel | 0.6 - 0.9 % Show Supplier Material materials with Nickel of 0.6 - 0.9 % | ||
Nitrogen | 0.03 % Show Supplier Material materials with Nitrogen of 0.03 % | max. | |
Other | 0.4 % Show Supplier Material materials with Other of 0.4 % | total | |
Oxygen | 0.25 % Show Supplier Material materials with Oxygen of 0.25 % | max. | |
Titanium | Balance |
Technological properties
Property | ||
---|---|---|
Application areas | Ti Gr 12 semi-finished products are used in some areas, but the material is mainly used in the chemical industry and in the manufacture of pressure vessels. | |
Corrosion properties | Titanium Gr.12 offers excellent corrosion resistance to acids as well as very good resistance to crevice corrosion in hot brines. Due to the higher strength, Titanium Gr.12 can be used with a thinner wall thickness than Titanium Gr.2 or Titanium Gr.7 under the same conditions. | |
Other | We are pleased to offer you powder for 3D printing made of Titan Grade 12 / 3.7105 / UNS N53400 |