Ti GR 5 / 3.7165

Alternative and trade names
Ti6Al4V, Titanium Grade 4, Ti6-Al4-V
Want to keep this datasheet? Save it now in your required format

Description

Titanium Grade 5 is the most widely used titanium alloy. It is characterized by good hot formability and weldability. It is also resistant to salt water, marine atmosphere and a variety of corrosive media temperatures below 300 ° C. Grade 5 titanium alloy is most likely to be accepted by the human body (medical industry).

Equivalent Materials

This material data has been provided by Hempel Special Metals.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

Properties

General

PropertyTemperatureValue

Density

23.0 °C

4.43 g/cm³

Show Supplier Material materials with Density of 4.43 g/cm³

Mechanical

PropertyTemperatureValue

Elongation A50

23.0 °C

15 %

Show Supplier Material materials with Elongation A50 of 15 %

Hardness, Rockwell

23.0 °C

34 [-]

Show Supplier Material materials with Hardness, Rockwell of 34 [-]

Tensile strength

23.0 °C

950 MPa

Show Supplier Material materials with Tensile strength of 950 MPa

Yield strength Rp0.2

23.0 °C

880 MPa

Show Supplier Material materials with Yield strength Rp0.2 of 880 MPa

Thermal

PropertyValue

Melting point

1650 °C

Show Supplier Material materials with Melting point of 1650 °C

Chemical properties

PropertyValueComment

Aluminium

5.5 - 6.75 %

Show Supplier Material materials with Aluminium of 5.5 - 6.75 %

Hydrogen

0.02 %

Show Supplier Material materials with Hydrogen of 0.02 %

max.

Titanium

88.74 - 91 %

Show Supplier Material materials with Titanium of 88.74 - 91 %

Vanadium

3.5 - 4.5 %

Show Supplier Material materials with Vanadium of 3.5 - 4.5 %

Technological properties

Property
Application areas

Titanium Grade 5 is found as most used alloy in many areas again. Thus, for example in:


  • Aerospace and Aircraft
  • Sports equipment
  • Medical industry
  • Chemical Industry

  • Welding

    As filler for titanium grade 5 titanium bare wire of the same group can be used.