PP TOPILENE® HB242P

Alternative and trade names
TOPILENE® HB242P

Want to keep this datasheet? Save it now in your required format

Description

TOPILENE® HB242P is a High Modulus PP impact copolymer (PP-HM). It shows very high stiffness and an excellent impact strength providing superior processing characteristics. HB242P makes it possible to produce thinner wall PP pipe while keeping the same ring stiffness of normal PP-B pipes.

This material data has been provided by Hyosung Chemical Corporation.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

All categories

Properties

General

Property	Temperature	Value	Comment
Density	23.0 °C	0.9 g/cm³ Show Supplier Material materials with Density of 0.9 g/cm³	ASTM D792

Mechanical

Property	Temperature	Value	Comment
Flexural modulus	23.0 °C	1.77 GPa Show Supplier Material materials with Flexural modulus of 1.77 GPa	ASTM D790
Hardness, Rockwell R	23.0 °C	95 [-] Show Supplier Material materials with Hardness, Rockwell R of 95 [-]	ASTM D785
Impact strength, Izod unnotched, ASTM	-10.0 °C	50 J/m Show Supplier Material materials with Impact strength, Izod unnotched, ASTM of 50 J/m	ASTM D256
Yield strength	23.0 °C	31.38 MPa Show Supplier Material materials with Yield strength of 31.38 MPa	ASTM D638

Thermal

Property	Value	Comment
Melting point	167 °C Show Supplier Material materials with Melting point of 167 °C	ASTM D3418

Rheological Properties

Property	Value	Comment
Melt mass-flow rate	0.3 g/10min Show Supplier Material materials with Melt mass-flow rate of 0.3 g/10min	ASTM D1238

Technological properties

Property
Application areas	Sewer/drainage pipes (solid wall type-corrugated type), storm water drainage system

PP TOPILENE® HB242P

Description

Ashby charts

Applications

Materials by this supplier

Properties