SR-200 Beryllium Structural grades

Alternative and trade names
SR-200
Want to keep this datasheet? Save it now in your required format

Description

SR-200 - sheet beryllium metal manufactured by warm rolling billets of vacuum hot-pressed block. It is often selected by designers seeking high-performance heat sinks and structural supports in military electronic and avionics systems and is well suited for satellite structures as a hot-formed material.

Related Standards

This material data has been provided by Materion Brush GmbH.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

Properties

Dimension

PropertyValueComment

Length

1830 mm

Show Supplier Material materials with Length of 1830 mm

max.

Thickness

0.5 - 6.25 mm

Show Supplier Material materials with Thickness of 0.5 - 6.25 mm

Width

610 mm

Show Supplier Material materials with Width of 610 mm

max.

Mechanical

PropertyTemperatureValue

Elongation

23.0 °C

10 %

Show Supplier Material materials with Elongation of 10 %

Tensile strength

23.0 °C

483 MPa

Show Supplier Material materials with Tensile strength of 483 MPa

Yield strength Rp0.2

23.0 °C

345 MPa

Show Supplier Material materials with Yield strength Rp0.2 of 345 MPa

Chemical properties

PropertyValueComment

Aluminium

0.16 %

Show Supplier Material materials with Aluminium of 0.16 %

max.

Beryllium

98 %

Show Supplier Material materials with Beryllium of 98 %

min., BeO: 2% max

Carbon

0.15 %

Show Supplier Material materials with Carbon of 0.15 %

max.

Iron

0.18 %

Show Supplier Material materials with Iron of 0.18 %

max.

Magnesium

0.08 %

Show Supplier Material materials with Magnesium of 0.08 %

max.

Other

0.04 %

Show Supplier Material materials with Other of 0.04 %

max., other metallic impurities each

Silicon

0.08 %

Show Supplier Material materials with Silicon of 0.08 %

max.

Technological properties

Property
Application areas

Intelligence, surveillance and reconnaissance (ISR) systems, Electro-optical infrared (EO/IR) & targeting systems, Airborne early warning & control systems (AEW&C), Surveillance, reconnaissance and targeting (SRT), Size, weight and power (SWaP) replacement systems, Semiconductor capital equipment, Space-based systems and components, James Webb Space Telescope support structure

Processing history

The standard condition of sheet shall be hot rolled, ground, stress relieved and etched. Rework of local areas may be performed within tolerances established by this specification. Surface finish shall be 63 microinches rms or finer.