S-200-F H Beryllium Structural grades

Alternative and trade names
S-200-F H
Want to keep this datasheet? Save it now in your required format

Description

Hot isostatically pressed structural grade 98.5% beryllium. This beryllium is more uniform with higher density and higher mechanical properties than traditional vacuum hot pressed beryllium. The material can be formed into regular or custom shapes, and the production process has been optimized to conserve material and reduce total machining time.

Related Standards

This material data has been provided by Materion Brush GmbH.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

Properties

General

PropertyValueTemperatureComment

Bulk density

1.84 g/cm³

Show Supplier Material materials with Bulk density of 1.84 g/cm³ at 23.0 °C

23.0 °C

for BeO amount of 1.5%

Grain size

12 μm

Show Supplier Material materials with Grain size of 12 μm

max.

Mechanical

PropertyValueTemperature

Elastic modulus

303 GPa

Show Supplier Material materials with Elastic modulus of 303 GPa at 23.0 °C

23.0 °C

Elongation

3 %

Show Supplier Material materials with Elongation of 3 % at 23.0 °C

23.0 °C

Fatigue strength

214 MPa

Show Supplier Material materials with Fatigue strength of 214 MPa at 23.0 °C

23.0 °C

Tensile strength

414 MPa

Show Supplier Material materials with Tensile strength of 414 MPa at 23.0 °C

23.0 °C

Yield strength Rp0.2

296 MPa

Show Supplier Material materials with Yield strength Rp0.2 of 296 MPa at 23.0 °C

23.0 °C

Thermal

PropertyValueTemperature

Coefficient of thermal expansion

1.13E-5 1/K

Show Supplier Material materials with Coefficient of thermal expansion of 1.13E-5 1/K at 23.0 °C

23.0 °C

Specific heat capacity

1950 J/(kg·K)

Show Supplier Material materials with Specific heat capacity of 1950 J/(kg·K) at 23.0 °C

23.0 °C

Thermal conductivity

216 W/(m·K)

Show Supplier Material materials with Thermal conductivity of 216 W/(m·K) at 23.0 °C

23.0 °C

Electrical

PropertyValue

Specific Electrical conductivity

45 % IACS

Show Supplier Material materials with Specific Electrical conductivity of 45 % IACS

Chemical properties

Property

Aluminium

0.1 %

max.

Beryllium

98.5 %

min., BeO: 1.5% max

Carbon

0.15 %

max.

Iron

0.13 %

max.

Magnesium

0.08 %

max.

Other

0.04 %

max., other metallic impurities each

Silicon

0.06 %

max.

Technological properties

Property
Application areas

Intelligence, surveillance and reconnaissance (ISR) systems, Electro-optical infrared (EO/IR) & targeting systems, Airborne early warning & control systems (AEW&C), Surveillance, reconnaissance and targeting (SRT), Size, weight and power (SWaP) replacement systems, Semiconductor capital equipment, Space-based systems and components, James Webb Space Telescope support structure

Processing history

This standard grade is to be produced through the consolidation of beryllium powder by Hot Isostatic Pressing (HIP).