ToughMet® 3TS Wire TS160U (C72900)

Alternative and trade names
ToughMet® 3 TS Alloy

Want to keep this datasheet? Save it now in your required format

Description

ToughMet 3 TS alloy is a cold worked, spinodally hardened alloy designed to provide high strength for the most demanding static structural loads and pressures. It provides high toughness combined with high strength to resist dynamic impact loading. ToughMet 3 TS alloy provides galling resistance, high bearing performance and compatibility with many sour environments or salt water. It is non-magnetic and very easy to machine into complex components.

Related Standards

AMS 4597

This material data has been provided by Materion Brush GmbH.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Properties

General

Property	Temperature	Value
Density	23.0 °C	9 g/cm³ Show Supplier Material materials with Density of 9 g/cm³

Dimension

Property	Value	Comment
Diameter	6.35 - 10 mm Show Supplier Material materials with Diameter of 6.35 - 10 mm	also for less than 6.35mm

Mechanical

Property	Temperature	Value	Comment
Elastic modulus	23.0 °C	144 GPa Show Supplier Material materials with Elastic modulus of 144 GPa
Elongation	23.0 °C	5 - 7 % Show Supplier Material materials with Elongation of 5 - 7 %	in 4D
Hardness, Rockwell C	23.0 °C	32 [-] Show Supplier Material materials with Hardness, Rockwell C of 32 [-]
Poisson's ratio	23.0 °C	0.33 [-] Show Supplier Material materials with Poisson's ratio of 0.33 [-]
Tensile strength	23.0 °C	1105 MPa Show Supplier Material materials with Tensile strength of 1105 MPa
Yield strength Rp0.2	23.0 °C	1035 MPa Show Supplier Material materials with Yield strength Rp0.2 of 1035 MPa

Thermal

Property	Temperature	Value
Coefficient of thermal expansion	23.0 °C	1.64E-5 1/K Show Supplier Material materials with Coefficient of thermal expansion of 1.64E-5 1/K
Thermal conductivity	23.0 °C	38 W/(m·K) Show Supplier Material materials with Thermal conductivity of 38 W/(m·K)

Electrical

Property	Temperature	Value	Comment
Electrical conductivity	23.0 °C	4.00E+6 S/m Show Supplier Material materials with Electrical conductivity of 4.00E+6 S/m	max.
Specific Electrical conductivity		7 % IACS Show Supplier Material materials with Specific Electrical conductivity of 7 % IACS	max.

Magnetic

Property	Temperature	Value
Relative magnetic permeability	23.0 °C	1 [-] Show Supplier Material materials with Relative magnetic permeability of 1 [-]

Technological properties

Property
Application areas	ToughMet 3 TS alloy tempers are commonly used in the oil and gas industry, oil & gas production via our sucker rod couplings and in commercial aircraft.

ToughMet® 3TS Wire TS160U (C72900)

Description

Related Standards

Ashby charts

Applications

Materials by this supplier

Properties