General
Property | Temperature | Value |
---|---|---|
Density | 23.0 °C | 9 g/cm³ Show Supplier Material materials with Density of 9 g/cm³ |
Dimension
Property | Value |
---|---|
Inside diameter | 12.7 - 76.2 mm Show Supplier Material materials with Inside diameter of 12.7 - 76.2 mm |
Outside diameter | 28.6 - 254 mm Show Supplier Material materials with Outside diameter of 28.6 - 254 mm |
Wall thickness | 6.35 - 15.9 mm Show Supplier Material materials with Wall thickness of 6.35 - 15.9 mm |
Mechanical
Property | Temperature | Value | Comment |
---|---|---|---|
Elastic modulus | 23.0 °C | 144 GPa Show Supplier Material materials with Elastic modulus of 144 GPa | |
Elongation | 23.0 °C | 4 % Show Supplier Material materials with Elongation of 4 % | |
Fatigue strength | 23.0 °C | 413 MPa Show Supplier Material materials with Fatigue strength of 413 MPa | 10⁶ cycles R=-1 |
Hardness, Rockwell C | 23.0 °C | 30 [-] Show Supplier Material materials with Hardness, Rockwell C of 30 [-] | |
Poisson's ratio | 23.0 °C | 0.3 [-] Show Supplier Material materials with Poisson's ratio of 0.3 [-] | |
Tensile strength | 23.0 °C | 683 - 758 MPa Show Supplier Material materials with Tensile strength of 683 - 758 MPa | |
Yield strength Rp0.2 | 23.0 °C | 652 - 724 MPa Show Supplier Material materials with Yield strength Rp0.2 of 652 - 724 MPa |
Thermal
Property | Temperature | Value |
---|---|---|
Coefficient of thermal expansion | 23.0 °C | 1.6E-5 1/K Show Supplier Material materials with Coefficient of thermal expansion of 1.6E-5 1/K |
Thermal conductivity | 23.0 °C | 38 W/(m·K) Show Supplier Material materials with Thermal conductivity of 38 W/(m·K) |
Electrical
Property | Value |
---|---|
Specific Electrical conductivity | 9 % IACS Show Supplier Material materials with Specific Electrical conductivity of 9 % IACS |
Magnetic
Property | Temperature | Value |
---|---|---|
Relative magnetic permeability | 23.0 °C | 1 [-] Show Supplier Material materials with Relative magnetic permeability of 1 [-] |
Chemical properties
Technological properties
Property | ||
---|---|---|
Application areas | ToughMet 3 CX alloy is used for wear plates, bushings, sleeve bearings, linear bearings and thrust bearings in industrial, off-road, mining and heavy equipment. It is also used for oil and gas drilling hardware. |