UNS C75200 boway

Alternative and trade names
boway 75200
Want to keep this datasheet? Save it now in your required format

Description

Excellent ductility combined with very good corrosion resistance in fresh water and see water . Very good behavior against electromagnetic interference as well as excellent stress relaxation resistance and solderability. Low sensitivity to stress corrosion cracking.

Equivalent Materials

This material data has been provided by Ningbo Boway Alloy Material.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyValue

Density

8.7 g/cm³

Show Supplier Material materials with Density of 8.7 g/cm³

Dimension

PropertyValue

Dimensions

Strip thickness 0.08 - 3.0 mm, other gauges on request. Strip width from 8.5 mm.

Mechanical

PropertyValueTesting StandardComment

Bendability 180°, bw

0 [-]

Show Supplier Material materials with Bendability 180°, bw of 0 [-]

ASTM B820

R375(O) | bending thickness: 0.08-0.2 mm & bending width: 10 mm

2 [-]

Show Supplier Material materials with Bendability 180°, bw of 2 [-]

ASTM B820

R440(H/2) | bending thickness: 0.08-0.2 mm & bending width: 10 mm

4 [-]

Show Supplier Material materials with Bendability 180°, bw of 4 [-]

ASTM B820

R540(H) | bending thickness: 0.08-0.2 mm & bending width: 10 mm

Bendability 180°, gw

0 [-]

Show Supplier Material materials with Bendability 180°, gw of 0 [-]

ASTM B820

R375(O) | bending thickness: 0.08-0.2 mm & bending width: 10 mm

0 [-]

Show Supplier Material materials with Bendability 180°, gw of 0 [-]

ASTM B820

R440(H/2) | bending thickness: 0.08-0.2 mm & bending width: 10 mm

2 [-]

Show Supplier Material materials with Bendability 180°, gw of 2 [-]

ASTM B820

R540(H) | bending thickness: 0.08-0.2 mm & bending width: 10 mm

Bendability 90°, bw

0 [-]

Show Supplier Material materials with Bendability 90°, bw of 0 [-]

EN ISO 7438

R375(O) | bending thickness: 0.08-0.2 mm & bending width: 10 mm

1 [-]

Show Supplier Material materials with Bendability 90°, bw of 1 [-]

EN ISO 7438

R440(H/2) | bending thickness: 0.08-0.2 mm & bending width: 10 mm

3 [-]

Show Supplier Material materials with Bendability 90°, bw of 3 [-]

EN ISO 7438

R540(H) | bending thickness: 0.08-0.2 mm & bending width: 10 mm

Bendability 90°, gw

0 [-]

Show Supplier Material materials with Bendability 90°, gw of 0 [-]

EN ISO 7438

R375(O) | bending thickness: 0.08-0.2 mm & bending width: 10 mm

0 [-]

Show Supplier Material materials with Bendability 90°, gw of 0 [-]

EN ISO 7438

R440(H/2) | bending thickness: 0.08-0.2 mm & bending width: 10 mm

1 [-]

Show Supplier Material materials with Bendability 90°, gw of 1 [-]

EN ISO 7438

R540(H) | bending thickness: 0.08-0.2 mm & bending width: 10 mm

Elastic modulus

135 GPa

Show Supplier Material materials with Elastic modulus of 135 GPa

Elongation

20 %

Show Supplier Material materials with Elongation of 20 %

min. | R375(O), A50

Hardness, Vickers

90 - 120 [-]

Show Supplier Material materials with Hardness, Vickers of 90 - 120 [-]

R375(O) | For reference only

120 - 180 [-]

Show Supplier Material materials with Hardness, Vickers of 120 - 180 [-]

R440(H/2) | For reference only

150 - 210 [-]

Show Supplier Material materials with Hardness, Vickers of 150 - 210 [-]

R540(H) | For reference only

185 [-]

Show Supplier Material materials with Hardness, Vickers of 185 [-]

min. | R610(EH) | For reference only

Poisson's ratio

0.33 [-]

Show Supplier Material materials with Poisson's ratio of 0.33 [-]

Tensile strength

440 - 570 MPa

Show Supplier Material materials with Tensile strength of 440 - 570 MPa

R440(H/2)

540 - 640 MPa

Show Supplier Material materials with Tensile strength of 540 - 640 MPa

R540(H)

Yield strength

180 MPa

Show Supplier Material materials with Yield strength of 180 MPa

min. | R375(O)

250 MPa

Show Supplier Material materials with Yield strength of 250 MPa

min. | R440(H/2)

420 MPa

Show Supplier Material materials with Yield strength of 420 MPa

min. | R540(H)

520 MPa

Show Supplier Material materials with Yield strength of 520 MPa

min. | R610(EH)

Thermal

PropertyTemperatureValueComment

Coefficient of thermal expansion

1.68e-05 1/K

Show Supplier Material materials with Coefficient of thermal expansion of 1.68e-05 1/K

average value between 20-300°C

Specific heat capacity

340 J/(kg·K)

Show Supplier Material materials with Specific heat capacity of 340 J/(kg·K)

Thermal conductivity

20 °C

32 W/(m·K)

Show Supplier Material materials with Thermal conductivity of 32 W/(m·K)

Electrical

PropertyTemperatureValue

Electrical conductivity

20 °C

0.004 S/m

Show Supplier Material materials with Electrical conductivity of 0.004 S/m

Specific Electrical conductivity

20 °C

7 % IACS

Show Supplier Material materials with Specific Electrical conductivity of 7 % IACS

Chemical properties

PropertyValue

Copper

64 %

Show Supplier Material materials with Copper of 64 %

Nickel

3 %

Show Supplier Material materials with Nickel of 3 %

Zinc

Balance

Technological properties

Property
Application areas

Application target:

Signal ConnectorSuitable
Power ConnectorNot suitable
Miniaturized ConnectorSuitable
Switch / RelaySuitable
ShieldingVery suitable


Ideal for EMI shielding ,gaskets etc.

Chemical composition

The chemical composition is the nominal composition of the alloy

Coating

Electroplating: Very good


Hot dip tinning: Very good

Cold Forming

Very good

Machining

Less Suitable

Packaging size

Standard coils with outside diameters up to 1300 mm. Traverse-wound coils with drum weights up to 500 kg. Multiple-coil up to 3 tons.

Soldering general

Soft soldering: Very good

Testings

Fatigue strength:

The fatigue strength is defined as the maximum bending stress amplitude which a material withstands for 10.000.000 load cycles under symmetrical alternate load without breaking. It depends on the temper selected and can be estimated typically by 1/3 of tensile strength. For solid solution fine grain materials fatigue strength might increase up to 0,5 * of tensile strength.


Bending test:

90° bend test According to EN ISO 7438, 180° bend test acc. to ASTM B820, shown values might show orange- peel, however no crack.

Welding

Laser welding: Good


Resistance welding: Very good