UNS C51100 boway

Alternative and trade names
boway 51100
Want to keep this datasheet? Save it now in your required format

Description

Excellent formability and medium/high strength combined with low sensitivity against stress corrosion cracking. Very good corrosion resistance as well as excellent solderability.

Equivalent Materials

This material data has been provided by Ningbo Boway Alloy Material.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyValue

Density

8.8 g/cm³

Show Supplier Material materials with Density of 8.8 g/cm³

Dimension

PropertyValue

Dimensions

Strip thickness 0.08 - 3.0 mm, other gauges on request. Strip width from 8.5 mm. Electroplated and Hot-dip tinned strip available.

Mechanical

PropertyValueTesting StandardComment

Bendability 180°, bw

0 [-]

Show Supplier Material materials with Bendability 180°, bw of 0 [-]

ASTM B820

R380(1/2H) | bending thickness: ≤ 0.5 mm & bending width: 10 mm

1 [-]

Show Supplier Material materials with Bendability 180°, bw of 1 [-]

ASTM B820

R460(3/4H) | bending thickness: ≤ 0.5 mm & bending width: 10 mm

1.5 [-]

Show Supplier Material materials with Bendability 180°, bw of 1.5 [-]

ASTM B820

R495(H) | bending thickness: ≤ 0.5 mm & bending width: 10 mm

2 [-]

Show Supplier Material materials with Bendability 180°, bw of 2 [-]

ASTM B820

R580(EH) | bending thickness: ≤ 0.5 mm & bending width: 10 mm

3 [-]

Show Supplier Material materials with Bendability 180°, bw of 3 [-]

ASTM B820

R625(SH) | bending thickness: ≤ 0.5 mm & bending width: 10 mm

Bendability 180°, gw

0 [-]

Show Supplier Material materials with Bendability 180°, gw of 0 [-]

ASTM B820

R380(1/2H) | bending thickness: ≤ 0.5 mm & bending width: 10 mm

0 [-]

Show Supplier Material materials with Bendability 180°, gw of 0 [-]

ASTM B820

R460(3/4H) | bending thickness: ≤ 0.5 mm & bending width: 10 mm

0 [-]

Show Supplier Material materials with Bendability 180°, gw of 0 [-]

ASTM B820

R495(H) | bending thickness: ≤ 0.5 mm & bending width: 10 mm

1 [-]

Show Supplier Material materials with Bendability 180°, gw of 1 [-]

ASTM B820

R580(EH) | bending thickness: ≤ 0.5 mm & bending width: 10 mm

1 [-]

Show Supplier Material materials with Bendability 180°, gw of 1 [-]

ASTM B820

R625(SH) | bending thickness: ≤ 0.5 mm & bending width: 10 mm

Bendability 90°, bw

0 [-]

Show Supplier Material materials with Bendability 90°, bw of 0 [-]

EN ISO 7438

R380(1/2H) | bending thickness: ≤ 0.5 mm & bending width: 10 mm

0 [-]

Show Supplier Material materials with Bendability 90°, bw of 0 [-]

EN ISO 7438

R460(3/4H) | bending thickness: ≤ 0.5 mm & bending width: 10 mm

0.5 [-]

Show Supplier Material materials with Bendability 90°, bw of 0.5 [-]

EN ISO 7438

R495(H) | bending thickness: ≤ 0.5 mm & bending width: 10 mm

1.5 [-]

Show Supplier Material materials with Bendability 90°, bw of 1.5 [-]

EN ISO 7438

R580(EH) | bending thickness: ≤ 0.5 mm & bending width: 10 mm

2 [-]

Show Supplier Material materials with Bendability 90°, bw of 2 [-]

EN ISO 7438

R625(SH) | bending thickness: ≤ 0.5 mm & bending width: 10 mm

Bendability 90°, gw

0 [-]

Show Supplier Material materials with Bendability 90°, gw of 0 [-]

EN ISO 7438

R380(1/2H) | bending thickness: ≤ 0.5 mm & bending width: 10 mm

0 [-]

Show Supplier Material materials with Bendability 90°, gw of 0 [-]

EN ISO 7438

R460(3/4H) | bending thickness: ≤ 0.5 mm & bending width: 10 mm

0 [-]

Show Supplier Material materials with Bendability 90°, gw of 0 [-]

EN ISO 7438

R495(H) | bending thickness: ≤ 0.5 mm & bending width: 10 mm

0.5 [-]

Show Supplier Material materials with Bendability 90°, gw of 0.5 [-]

EN ISO 7438

R580(EH) | bending thickness: ≤ 0.5 mm & bending width: 10 mm

0.5 [-]

Show Supplier Material materials with Bendability 90°, gw of 0.5 [-]

EN ISO 7438

R625(SH) | bending thickness: ≤ 0.5 mm & bending width: 10 mm

Elastic modulus

120 GPa

Show Supplier Material materials with Elastic modulus of 120 GPa

Elongation

1 %

Show Supplier Material materials with Elongation of 1 %

min. | R580(EH), A50

1 %

Show Supplier Material materials with Elongation of 1 %

min. | R625(SH), A50

2 %

Show Supplier Material materials with Elongation of 2 %

min. | R495(H), A50

6 %

Show Supplier Material materials with Elongation of 6 %

min. | R460(3/4H), A50

12 %

Show Supplier Material materials with Elongation of 12 %

min. | R380(1/2H), A50

Hardness, Vickers

110 - 160 [-]

Show Supplier Material materials with Hardness, Vickers of 110 - 160 [-]

R380(1/2H) | For reference only

150 - 190 [-]

Show Supplier Material materials with Hardness, Vickers of 150 - 190 [-]

R460(3/4H) | For reference only

160 - 200 [-]

Show Supplier Material materials with Hardness, Vickers of 160 - 200 [-]

R495(H) | For reference only

180 - 220 [-]

Show Supplier Material materials with Hardness, Vickers of 180 - 220 [-]

R580(EH) | For reference only

200 - 240 [-]

Show Supplier Material materials with Hardness, Vickers of 200 - 240 [-]

R625(SH) | For reference only

Poisson's ratio

0.33 [-]

Show Supplier Material materials with Poisson's ratio of 0.33 [-]

Tensile strength

380 - 485 MPa

Show Supplier Material materials with Tensile strength of 380 - 485 MPa

R380(1/2H)

460 - 565 MPa

Show Supplier Material materials with Tensile strength of 460 - 565 MPa

R460(3/4H)

495 - 600 MPa

Show Supplier Material materials with Tensile strength of 495 - 600 MPa

R495(H)

580 - 685 MPa

Show Supplier Material materials with Tensile strength of 580 - 685 MPa

R580(EH)

625 - 725 MPa

Show Supplier Material materials with Tensile strength of 625 - 725 MPa

R625(SH)

Yield strength

290 MPa

Show Supplier Material materials with Yield strength of 290 MPa

min. | R380(1/2H)

440 MPa

Show Supplier Material materials with Yield strength of 440 MPa

min. | R460(3/4H)

485 MPa

Show Supplier Material materials with Yield strength of 485 MPa

min. | R495(H)

560 MPa

Show Supplier Material materials with Yield strength of 560 MPa

min. | R580(EH)

605 MPa

Show Supplier Material materials with Yield strength of 605 MPa

min. | R625(SH)

Thermal

PropertyTemperatureValueComment

Coefficient of thermal expansion

1.78e-05 1/K

Show Supplier Material materials with Coefficient of thermal expansion of 1.78e-05 1/K

average value between 20-300°C

Specific heat capacity

377 J/(kg·K)

Show Supplier Material materials with Specific heat capacity of 377 J/(kg·K)

Thermal conductivity

20 °C

100 W/(m·K)

Show Supplier Material materials with Thermal conductivity of 100 W/(m·K)

Electrical

PropertyTemperatureValue

Electrical conductivity

20 °C

0.021 S/m

Show Supplier Material materials with Electrical conductivity of 0.021 S/m

Specific Electrical conductivity

20 °C

12 % IACS

Show Supplier Material materials with Specific Electrical conductivity of 12 % IACS

Chemical properties

PropertyValue

Copper

Balance

Tin

4 %

Show Supplier Material materials with Tin of 4 %

Technological properties

Property
Application areas

Application target:

Signal ConnectorSuitable
Power ConnectorNot suitable
Miniaturized ConnectorSuitable
Switch / RelaySuitable
SemiconductorNot recommended

Chemical composition

The chemical composition is the nominal composition of the alloy

Coating

Electroplating: Very good


Hot dip tinning: Very good

Cold Forming

Very good

Machining

Not suitable

Packaging size

Standard coils with outside diameters up to 1300 mm. Traverse-wound coils with drum weights up to 500 kg. Multiple-coil up to 3 tons.

Testings

Fatigue strength:

The fatigue strength is defined as the maximum bending stress amplitude which a material withstands for 10.000.000 load cycles under symmetrical alternate load without breaking. It depends on the temper selected and can be estimated typically by 1/3 of tensile strength. For solid solution fine grain materials fatigue strength might increase up to 0,5 * of tensile strength.


Bending test:

90° bend test According to EN ISO 7438, 180° bend test acc. to ASTM B820, shown values might show orange- peel, however no crack.

Welding

Good