TPE-S PHOENIX 06851

Alternative and trade names
THERMOLAST®, Monprene®, Versaflex™, Dryflex®
Want to keep this datasheet? Save it now in your required format

Description

This grade is an easy processing Thermoplastic Elastomer (TPE) designed for injection molding. The key features are: Easy to process and color, overmoldable to Polypropylene, excellent tensile strength, strong tear strength, good wear resistance, non toxic

This material data has been provided by Phon Tech.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

Properties

General

PropertyValueTesting Standard

Density

1.02 - 1.08 g/cm³

Show Supplier Material materials with Density of 1.02 - 1.08 g/cm³

ASTM D792

Mechanical

PropertyValueTesting StandardComment

Elongation

762.3 %

Show Supplier Material materials with Elongation of 762.3 %

ASTM D412

500 mm/min

Hardness, Shore A

87 - 93 [-]

Show Supplier Material materials with Hardness, Shore A of 87 - 93 [-]

ASTM D2240

Modulus at 100% elongation

0.00481 GPa

Show Supplier Material materials with Modulus at 100% elongation of 0.00481 GPa

ASTM D412

500 mm/min

Modulus at 300% elongation

0.00556 GPa

Show Supplier Material materials with Modulus at 300% elongation of 0.00556 GPa

ASTM D412

500 mm/min

Tear strength

51.8 kN/m

Show Supplier Material materials with Tear strength of 51.8 kN/m

ASTM D624 Die C

500 mm/min

Tensile strength

11.0 MPa

Show Supplier Material materials with Tensile strength of 11.0 MPa

ASTM D412

500 mm/min

Rheological Properties

PropertyValueTesting StandardComment

Melt mass-flow rate

19.1 g/10min

Show Supplier Material materials with Melt mass-flow rate of 19.1 g/10min

ASTM D1238

190°C/2.16kg

Shrinkage

0.6 - 1.2 %

Show Supplier Material materials with Shrinkage of 0.6 - 1.2 %

ASTM D955

Transverse

0.7 - 1.3 %

Show Supplier Material materials with Shrinkage of 0.7 - 1.3 %

ASTM D955

Technological properties

Property
Application areas

Trolley wheel, bicycle racks clamp, pen grip

Certifications

REACH SVHC free, RoHS 2.0, GS AfPS GS 2019:01 PAK, EN 71-3

Color

White

Fillers

Calcium Carbonate

Other

Overmolding capabilities: PP