Properties
General
| Property | Value | Testing Standard |
|---|---|---|
Density | 1.19 - 1.25 g/cm³ Show Supplier Material materials with Density of 1.19 - 1.25 g/cm³ | ASTM D792 |
Mechanical
| Property | Value | Testing Standard | Comment |
|---|---|---|---|
Elongation | 577.6 % Show Supplier Material materials with Elongation of 577.6 % | ASTM D412 | 500 mm/min |
Hardness, Shore A | 57 - 63 [-] Show Supplier Material materials with Hardness, Shore A of 57 - 63 [-] | ASTM D2240 | |
Modulus at 100% elongation | 0.0025 GPa Show Supplier Material materials with Modulus at 100% elongation of 0.0025 GPa | ASTM D412 | 500 mm/min |
Modulus at 300% elongation | 0.00403 GPa Show Supplier Material materials with Modulus at 300% elongation of 0.00403 GPa | ASTM D412 | 500 mm/min |
Tear strength | 33.4 kN/m Show Supplier Material materials with Tear strength of 33.4 kN/m | ASTM D624 Die C | 500 mm/min |
Tensile strength | 7.8 MPa Show Supplier Material materials with Tensile strength of 7.8 MPa | ASTM D412 | 500 mm/min |
Rheological Properties
| Property | Value | Testing Standard | Comment |
|---|---|---|---|
Melt mass-flow rate | 36.9 g/10min Show Supplier Material materials with Melt mass-flow rate of 36.9 g/10min | ASTM D1238 | 200°C/5kg |
Shrinkage | 1.1 - 1.7 % Show Supplier Material materials with Shrinkage of 1.1 - 1.7 % | ASTM D955 | Transverse |
1.3 - 1.9 % Show Supplier Material materials with Shrinkage of 1.3 - 1.9 % | ASTM D955 |
Technological properties
| Property | ||
|---|---|---|
| Application areas | Electrical and pneumatic tool grip, electronic appliances, tool grip | |
| Certifications | REACH SVHC free, RoHS 2.0, GS AfPS GS 2019:01 PAK, EN 71-3 | |
| Color | White | |
| Fillers | Calcium Carbonate | |
| Other | Overmolding capabilities: ABS, AS, PMMA, PA | |