General
Property | Value | Testing Standard |
---|---|---|
Density | 1.07 - 1.13 g/cm³ Show Supplier Material materials with Density of 1.07 - 1.13 g/cm³ | ASTM D792 |
Mechanical
Property | Temperature | Value | Testing Standard | Comment |
---|---|---|---|---|
Compression set | 23 °C | 30.1 [-] Show Supplier Material materials with Compression set of 30.1 [-] | ASTM D395 B | |
Elongation | 248.6 % Show Supplier Material materials with Elongation of 248.6 % | ASTM D412 | 500 mm/min | |
Hardness, Shore A | 62 - 68 [-] Show Supplier Material materials with Hardness, Shore A of 62 - 68 [-] | ASTM D2240 | ||
Modulus at 100% elongation | 0.00178 GPa Show Supplier Material materials with Modulus at 100% elongation of 0.00178 GPa | ASTM D412 | 500 mm/min | |
Tear strength | 12.1 kN/m Show Supplier Material materials with Tear strength of 12.1 kN/m | ASTM D624 Die C | 500 mm/min | |
Tensile strength | 2.1 MPa Show Supplier Material materials with Tensile strength of 2.1 MPa | ASTM D412 | 500 mm/min |
Rheological Properties
Property | Value | Testing Standard | Comment |
---|---|---|---|
Melt mass-flow rate | 96.7 g/10min Show Supplier Material materials with Melt mass-flow rate of 96.7 g/10min | ASTM D1238 | 190°C/2.16kg |
Shrinkage | 0.7 - 1.3 % Show Supplier Material materials with Shrinkage of 0.7 - 1.3 % | ASTM D955 | Transverse |
0.8 - 1.4 % Show Supplier Material materials with Shrinkage of 0.8 - 1.4 % | ASTM D955 |
Technological properties
Property | ||
---|---|---|
Application areas | Tool grip | |
Certifications | REACH SVHC free, RoHS 2.0, GS AfPS GS 2019:01 PAK, EN 71-3 | |
Color | Black | |
Fillers | Calcium Carbonate | |
Other | Overmolding capabilities: PP |