General
Property | Value | Testing Standard |
---|---|---|
Density | 0.85 - 0.91 g/cm³ Show Supplier Material materials with Density of 0.85 - 0.91 g/cm³ | ASTM D792 |
Mechanical
Property | Value | Testing Standard | Comment |
---|---|---|---|
Elongation | 744.7 % Show Supplier Material materials with Elongation of 744.7 % | ASTM D412 | 500 mm/min |
Hardness, Shore A | 42 - 48 [-] Show Supplier Material materials with Hardness, Shore A of 42 - 48 [-] | ASTM D2240 | |
Modulus at 100% elongation | 0.0009 GPa Show Supplier Material materials with Modulus at 100% elongation of 0.0009 GPa | ASTM D412 | 500 mm/min |
Modulus at 300% elongation | 0.0017 GPa Show Supplier Material materials with Modulus at 300% elongation of 0.0017 GPa | ASTM D412 | 500 mm/min |
Tear strength | 19.2 kN/m Show Supplier Material materials with Tear strength of 19.2 kN/m | ASTM D624 Die C | 500 mm/min |
Tensile strength | 4.4 MPa Show Supplier Material materials with Tensile strength of 4.4 MPa | ASTM D412 | 500 mm/min |
Rheological Properties
Property | Value | Testing Standard | Comment |
---|---|---|---|
Melt mass-flow rate | 13.6 g/10min Show Supplier Material materials with Melt mass-flow rate of 13.6 g/10min | ASTM D1238 | 200°C/5kg |
Shrinkage | 1.5 - 2.1 % Show Supplier Material materials with Shrinkage of 1.5 - 2.1 % | ASTM D955 | Transverse |
1.8 - 2.4 % Show Supplier Material materials with Shrinkage of 1.8 - 2.4 % | ASTM D955 |
Technological properties
Property | ||
---|---|---|
Application areas | Syringe stopper, seal, gasket, dropper bulb, pen grip, sport equipment | |
Certifications | REACH SVHC free, RoHS 2.0, GS AfPS GS 2019:01 PAK, EN 71-3, Meets FDA requirements | |
Color | Translucent | |
Other | Overmolding capabilities: PP |