Properties
General
| Property | Value | Testing Standard |
|---|---|---|
Density | 0.95 - 1.01 g/cm³ Show Supplier Material materials with Density of 0.95 - 1.01 g/cm³ | ASTM D792 |
Mechanical
| Property | Value | Testing Standard | Comment |
|---|---|---|---|
Elongation | 927.6 % Show Supplier Material materials with Elongation of 927.6 % | ASTM D412 | 500 mm/min |
Hardness, Shore A | 57 - 63 [-] Show Supplier Material materials with Hardness, Shore A of 57 - 63 [-] | ASTM D2240 | |
Modulus at 100% elongation | 0.00161 GPa Show Supplier Material materials with Modulus at 100% elongation of 0.00161 GPa | ASTM D412 | 500 mm/min |
Modulus at 300% elongation | 0.00227 GPa Show Supplier Material materials with Modulus at 300% elongation of 0.00227 GPa | ASTM D412 | 500 mm/min |
Tear strength | 23.9 kN/m Show Supplier Material materials with Tear strength of 23.9 kN/m | ASTM D624 Die C | 500 mm/min |
Tensile strength | 6.2 MPa Show Supplier Material materials with Tensile strength of 6.2 MPa | ASTM D412 | 500 mm/min |
Rheological Properties
| Property | Value | Testing Standard | Comment |
|---|---|---|---|
Melt mass-flow rate | 54.3 g/10min Show Supplier Material materials with Melt mass-flow rate of 54.3 g/10min | ASTM D1238 | 190°C/5kg |
Shrinkage | 1.2 - 1.8 % Show Supplier Material materials with Shrinkage of 1.2 - 1.8 % | ASTM D955 | |
1.2 - 1.8 % Show Supplier Material materials with Shrinkage of 1.2 - 1.8 % | ASTM D955 | Transverse |
Technological properties
| Property | ||
|---|---|---|
| Application areas | Syringe gasket, window seal | |
| Certifications | REACH SVHC free, RoHS 2.0, GS AfPS GS 2019:01 PAK, EN 71-3, Meets FDA requirements, Bio-Compatible | |
| Color | Black | |
| Fillers | Calcium Carbonate | |
| Other | Overmolding capabilities: PP | |