General
Property | Value | Testing Standard |
---|---|---|
Density | 1.15 - 1.21 g/cm³ Show Supplier Material materials with Density of 1.15 - 1.21 g/cm³ | ASTM D792 |
Mechanical
Property | Value | Testing Standard | Comment |
---|---|---|---|
Elongation | 703.5 % Show Supplier Material materials with Elongation of 703.5 % | ASTM D412 | 500 mm/min |
Hardness, Shore A | 47 - 53 [-] Show Supplier Material materials with Hardness, Shore A of 47 - 53 [-] | ASTM D2240 | |
Modulus at 100% elongation | 0.00116 GPa Show Supplier Material materials with Modulus at 100% elongation of 0.00116 GPa | ASTM D412 | 500 mm/min |
Modulus at 300% elongation | 0.00175 GPa Show Supplier Material materials with Modulus at 300% elongation of 0.00175 GPa | ASTM D412 | 500 mm/min |
Tear strength | 24.1 kN/m Show Supplier Material materials with Tear strength of 24.1 kN/m | ASTM D624 Die C | 500 mm/min |
Tensile strength | 7.7 MPa Show Supplier Material materials with Tensile strength of 7.7 MPa | ASTM D412 | 500 mm/min |
Rheological Properties
Property | Value | Testing Standard | Comment |
---|---|---|---|
Melt mass-flow rate | 6.7 g/10min Show Supplier Material materials with Melt mass-flow rate of 6.7 g/10min | ASTM D1238 | 200°C/5kg |
Shrinkage | 1.1 - 1.7 % Show Supplier Material materials with Shrinkage of 1.1 - 1.7 % | ASTM D955 | Transverse |
1.5 - 2.1 % Show Supplier Material materials with Shrinkage of 1.5 - 2.1 % | ASTM D955 |
Technological properties
Property | ||
---|---|---|
Application areas | Extrusion profile and many more… | |
Certifications | REACH SVHC free, RoHS 2.0, GS AfPS GS 2019:01 PAK, EN 71-3 | |
Color | White | |
Fillers | Calcium Carbonate | |
Other | Overmolding capabilities: PP | |
Processing methods |