General
Property | Temperature | Value | Comment |
---|---|---|---|
Coefficient of friction | 0.33 [-] Show Supplier Material materials with Coefficient of friction of 0.33 [-] | ||
Coefficient of friction, kinetic | 0.33 [-] Show Supplier Material materials with Coefficient of friction, kinetic of 0.33 [-] | ASTM D 3702 Modified: Manual | |
Density | 23.0 °C | 1.12 g/cm³ Show Supplier Material materials with Density of 1.12 g/cm³ | ISO 1183 |
Moisture absorption | 23.0 °C | 0.1 % Show Supplier Material materials with Moisture absorption of 0.1 % | ASTM D 570 | (23°C/50% RH/24 hrs) |
Mechanical
Property | Temperature | Value | Comment |
---|---|---|---|
Elastic modulus | 23.0 °C | 2.2 GPa Show Supplier Material materials with Elastic modulus of 2.2 GPa | ISO 527 | 1 mm/min |
Elongation | 23.0 °C | 5 % Show Supplier Material materials with Elongation of 5 % | ISO 527 | yield, 50 mm/min |
Flexural modulus | 23.0 °C | 2.1 GPa Show Supplier Material materials with Flexural modulus of 2.1 GPa | ISO 178 | 2 mm/min |
Impact strength, Charpy notched | 23.0 °C | 49 kJ/m² Show Supplier Material materials with Impact strength, Charpy notched of 49 kJ/m² | ISO 179/1eA | V-notch Edgew, 23°C, 80*10*4 sp=62mm |
Impact strength, Izod notched | 23.0 °C | 40 kJ/m² Show Supplier Material materials with Impact strength, Izod notched of 40 kJ/m² | ISO 180/1A | 80*10*4, 23°C |
Impact strength, Izod notched, ASTM | 23.0 °C | 463 J/m Show Supplier Material materials with Impact strength, Izod notched, ASTM of 463 J/m | ASTM D 256 | notched, -30°C |
Impact strength, Izod unnotched | 23.0 °C | 208 kJ/m² Show Supplier Material materials with Impact strength, Izod unnotched of 208 kJ/m² | ISO 180/1U | unnotched 80*10*4, 23°C |
Tensile strength | 23.0 °C | 50 MPa Show Supplier Material materials with Tensile strength of 50 MPa | ISO 527 | yield, 50 mm/min |
Thermal
Property | Value | Comment |
---|---|---|
Heat deflection temperature | 104 - 125 °C Show Supplier Material materials with Heat deflection temperature of 104 - 125 °C | |
Heat deflection temperature, 0.45 MPa | 125 °C Show Supplier Material materials with Heat deflection temperature, 0.45 MPa of 125 °C | ASTM D 648 | 3.2 mm, unannealed |
Heat deflection temperature, 1.80 MPa | 104 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 104 °C | ISO 75/Af | Flatw 80*10*4 sp=64mm |
Vicat softening temperature | 124 °C Show Supplier Material materials with Vicat softening temperature of 124 °C | ISO 306 | Rate B/120 |
Rheological Properties
Property | Temperature | Value | Comment |
---|---|---|---|
Melt mass-flow rate | 23 g/10min Show Supplier Material materials with Melt mass-flow rate of 23 g/10min | ASTM D 1238 | 260°C/5.0 kgf | |
Melt volume-flow rate | 21 cm³/10min Show Supplier Material materials with Melt volume-flow rate of 21 cm³/10min | ISO 1133 | MVR at 260°C/5.0 kg | |
Shrinkage | 23.0 °C | 0.7 % Show Supplier Material materials with Shrinkage of 0.7 % | SABIC method |
Shrinkage, transverse | 23.0 °C | 0.8 % Show Supplier Material materials with Shrinkage, transverse of 0.8 % | SABIC method |
Technological properties
Property | ||
---|---|---|
Application areas | Automotive , Console, Infotainment/Telematic, Interior, Interior trims | |
Availability | Europe,Asia,Americas | |
Processing methods | Drying Temperature: 105 to 110.0°C | |
Supplier Disclaimer | While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right. |