General
Mechanical
Property | Temperature | Value | Comment |
---|---|---|---|
Elongation | 23.0 °C | 150 % Show Supplier Material materials with Elongation of 150 % | SABIC - Japan Method | break |
Flexural modulus | 23.0 °C | 1.9 GPa Show Supplier Material materials with Flexural modulus of 1.9 GPa | ASTM D 790 |
Flexural strength | 23.0 °C | 74 MPa Show Supplier Material materials with Flexural strength of 74 MPa | ASTM D 790 |
Impact strength, Izod notched | 23.0 °C | 843 kJ/m² Show Supplier Material materials with Impact strength, Izod notched of 843 kJ/m² | ASTM D 256 | notched, 23°C |
Impact strength, Izod notched, ASTM | 23.0 °C | 843 J/m Show Supplier Material materials with Impact strength, Izod notched, ASTM of 843 J/m | ASTM D 256 | notched, 23°C |
Tensile strength | 23.0 °C | 45 MPa Show Supplier Material materials with Tensile strength of 45 MPa | SABIC - Japan Method | yield |
Thermal
Property | Temperature | Value | Comment |
---|---|---|---|
Coefficient of thermal expansion | 23.0 °C | 8E-5 - 1E-4 1/K Show Supplier Material materials with Coefficient of thermal expansion of 8E-5 - 1E-4 1/K | TMA | -30°C to 30°C |
Heat deflection temperature | 180 °C Show Supplier Material materials with Heat deflection temperature of 180 °C | ||
Heat deflection temperature, 0.45 MPa | 180 °C Show Supplier Material materials with Heat deflection temperature, 0.45 MPa of 180 °C | ASTM D 648 | 3.2 mm, unannealed |
Rheological Properties
Property | Temperature | Value | Comment |
---|---|---|---|
Shrinkage | 23.0 °C | 1.1 % Show Supplier Material materials with Shrinkage of 1.1 % | SABIC method | 3.2 mm |
Technological properties
Property | ||
---|---|---|
Application areas | Motorcycle, Head Protection, Exterior Trim | |
Availability | Asia | |
Supplier Disclaimer | While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right. |