NORYL™ Resin N190X - Asia

Want to keep this datasheet? Save it now in your required format

Description

NORYL™ N190X resin is a non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS). This injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of 5VA at 3mm and V0 at 1.5mm along with a UL746C Outdoor Suitability rating of F1. NORYL N190X resin offers strong electrical performance, low moisture absorption, dimensional stability, and hydrolytical stability. This material is an excellent candidate for indoor and outdoor electrical enclosure, wall plate / switch, connector, and solar / photovoltaic junction box applications.

This material data has been provided by Sabic.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

Properties

General

PropertyTemperatureValueComment

Limiting oxygen index

23.0 °C

39 %

Show Supplier Material materials with Limiting oxygen index of 39 %

Relative density

23.0 °C

1.13 [-]

Show Supplier Material materials with Relative density of 1.13 [-]

ASTM D 792 |

Water absorption

23.0 °C

0.08 %

Show Supplier Material materials with Water absorption of 0.08 %

ASTM D 570 | (23°C/24hrs)

Mechanical

PropertyTemperatureValueComment

Elastic modulus

23.0 °C

2.6 GPa

Show Supplier Material materials with Elastic modulus of 2.6 GPa

ISO 527 | 1 mm/min

Elongation

23.0 °C

9.2 %

Show Supplier Material materials with Elongation of 9.2 %

ISO 527 | break, 50 mm/min

Flexural modulus

23.0 °C

2.4 GPa

Show Supplier Material materials with Flexural modulus of 2.4 GPa

ISO 178 | 2 mm/min

Flexural strength

23.0 °C

87 MPa

Show Supplier Material materials with Flexural strength of 87 MPa

ISO 178 | yield, 2 mm/min

Hardness, Rockwell R

23.0 °C

120 [-]

Show Supplier Material materials with Hardness, Rockwell R of 120 [-]

ASTM D 785

Impact strength, Charpy notched

23.0 °C

20 kJ/m²

Show Supplier Material materials with Impact strength, Charpy notched of 20 kJ/m²

ISO 179/2C | 23°C

Impact strength, Izod notched

23.0 °C

20 kJ/m²

Show Supplier Material materials with Impact strength, Izod notched of 20 kJ/m²

ISO 180/1A | notched 80*10*4, 23°C

Impact strength, Izod notched, ASTM

23.0 °C

293 J/m

Show Supplier Material materials with Impact strength, Izod notched, ASTM of 293 J/m

ASTM D 256 | notched, 23°C

Impact strength, Izod unnotched, ASTM

23.0 °C

100 J/m

Show Supplier Material materials with Impact strength, Izod unnotched, ASTM of 100 J/m

ASTM D 4812 | unnotched, -30°C

Taber Abrasion

23.0 °C

76 mg/1000cy

Show Supplier Material materials with Taber Abrasion of 76 mg/1000cy

ASTM D 1044 | CS-17, 1 kg

Tensile strength

23.0 °C

50 MPa

Show Supplier Material materials with Tensile strength of 50 MPa

ISO 527 | break, 50 mm/min

Thermal

PropertyTemperatureValueComment

Coefficient of thermal expansion

23.0 °C

7.7E-5 1/K

Show Supplier Material materials with Coefficient of thermal expansion of 7.7E-5 1/K

ASTM E 831 | -40°C to 40°C

Coefficient of thermal expansion, transverse

23.0 °C

8.1E-5 1/K

Show Supplier Material materials with Coefficient of thermal expansion, transverse of 8.1E-5 1/K

ASTM E 831 | -40°C to 40°C

Glow Wire Flammability Index

960 °C

Show Supplier Material materials with Glow Wire Flammability Index of 960 °C

Glow Wire Ignition Temperature

775 °C

Show Supplier Material materials with Glow Wire Ignition Temperature of 775 °C

IEC 60695-2-13 | 2.0 mm

Heat deflection temperature

82 - 95 °C

Show Supplier Material materials with Heat deflection temperature of 82 - 95 °C

Heat deflection temperature, 0.45 MPa

95 °C

Show Supplier Material materials with Heat deflection temperature, 0.45 MPa of 95 °C

ISO 75/Bf | Flatw 80*10*4 sp=64mm

Heat deflection temperature, 1.80 MPa

82 °C

Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 82 °C

ISO 75/Af | Flatw 80*10*4 sp=64mm

Relative temperature index, electrical

95 °C

Show Supplier Material materials with Relative temperature index, electrical of 95 °C

UL 746B

Relative temperature index, mechanical impact

80 °C

Show Supplier Material materials with Relative temperature index, mechanical impact of 80 °C

UL 746B

Relative temperature index, mechanical strength

95 °C

Show Supplier Material materials with Relative temperature index, mechanical strength of 95 °C

UL 746B

Thermal conductivity

23.0 °C

0.24 W/(m·K)

Show Supplier Material materials with Thermal conductivity of 0.24 W/(m·K)

ASTM C177

Vicat softening temperature

107 °C

Show Supplier Material materials with Vicat softening temperature of 107 °C

ISO 306 | Rate B/120

Flammability

UL Recognized, 94V-0 Flame Class Rating: ≥1.5mm UL 94 <br> UL Recognized, 94HB Flame Class Rating: ≥1mm UL 94 <br> UL Recognized, 94-5VA Flame Class Rating: ≥3mm UL 94 <br> Glow Wire Flammability Index, 1.0 mm: 960°C IEC 60695-2-12 <br> Glow Wire Ignitability Temperature, 1.0 mm: 800°C IEC 60695-2-13 <br> UV-light, water exposure/immersion: F1- UL 746C <br> UL Yellow Card Link: https://iq.ul.com/ul/cert.aspx?ULID=100110158- - <br> UL Yellow Card Link 2: https://iq.ul.com/ul/cert.aspx?ULID=100110159- -

Electrical

PropertyTemperatureValueComment

Comparative tracking index

23.0 °C

1 V

Show Supplier Material materials with Comparative tracking index of 1 V

UL 746A | (UL) {PLC}

Dielectric constant, 100Hz

23.0 °C

2.74 [-]

Show Supplier Material materials with Dielectric constant, 100Hz of 2.74 [-]

ASTM D 150

Dielectric constant, 1KHz

23.0 °C

2.6 [-]

Show Supplier Material materials with Dielectric constant, 1KHz of 2.6 [-]

ASTM D 150

Dielectric strength

23.0 °C

19.2 kV/mm

Show Supplier Material materials with Dielectric strength of 19.2 kV/mm

ASTM D 149 | in oil, 3.2 mm

Dissipation factor, 100Hz

23.0 °C

0.01 [-]

Show Supplier Material materials with Dissipation factor, 100Hz of 0.01 [-]

ASTM D 150

Dissipation factor, 100kHz

23.0 °C

5.5E-3 [-]

Show Supplier Material materials with Dissipation factor, 100kHz of 5.5E-3 [-]

ASTM D 150

High Amp Arc Ignition

23.0 °C

6 mm

Show Supplier Material materials with High Amp Arc Ignition of 6 mm

≥, UL 746A | PLC 0

High Volt Arc Track Rate

23.0 °C

4 PLC Code

Show Supplier Material materials with High Volt Arc Track Rate of 4 PLC Code

UL 746A | (PLC)

Hot-Wire Ignition

23.0 °C

6 mm

Show Supplier Material materials with Hot-Wire Ignition of 6 mm

≥, UL 746A | PLC 1

Volume resistivity

23.0 °C

1.80E+16 Ω·cm

Show Supplier Material materials with Volume resistivity of 1.80E+16 Ω·cm

ASTM D 257

Rheological Properties

PropertyTemperatureValueComment

Melt mass-flow rate

20 g/10min

Show Supplier Material materials with Melt mass-flow rate of 20 g/10min

ASTM D 1238 | 280°C/5.0 kgf

Melt volume-flow rate

23 cm³/10min

Show Supplier Material materials with Melt volume-flow rate of 23 cm³/10min

ISO 1133 | MVR at 280°C/5.0 kg

Shrinkage

23.0 °C

0.5 %

Show Supplier Material materials with Shrinkage of 0.5 %

SABIC method | 3.2 mm

Technological properties

Property
Application areas

Vending Machine, Swimming Pool/Spa, Wireless Communications, Wiring Devices, Wearables, Laser Sintering, Power Manangement, Photovoltaic Components, Plumbing, Photo/Video Camera, Servingware, Small Appliance, Surgical Devices, Security/Detection, Respiratory, Monitoring and Imaging, Meter Water, Medical Facility Infrastructure, LED Lighting, Medical Device, Personal Computing, Personal Care, Non-LED Lighting, Document Handling, Door Handle, Displays, Data Transfer, Data Management, Algae, Building Element, Circuit Protection, Audio, Air Conditioning, Electronic Components, Enclosures, Energy Management, Electronics, Enclosure/Housing/Cover, Lab Ware and Clinical Diagnostics, Heavy Vehicles, Wire & cable

Availability

Asia,Americas

Processing methods

Nozzle Temperature: 250 to 275.0°C
Drying Time (Cumulative): 8hrs
Screw Speed: 20 to 100.0rpm
Drying Time: 3 to 4.0hrs
Rear - Zone 1 Temperature: 215 to 265.0°C
Melt Temperature: 250 to 275.0°C
Mold Temperature: 55 to 75.0°C
Drying Temperature: 75 to 80.0°C
Back Pressure: 0.3 to 0.7MPa
Vent Depth: 0.038 to 0.051mm
Middle - Zone 2 Temperature: 225 to 270.0°C
Front - Zone 3 Temperature: 240 to 275.0°C
Maximum Moisture Content: 0.02%
Shot to Cylinder Size: 30 to 70.0%

Supplier Disclaimer

While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.