General
Property | Temperature | Value | Comment |
---|---|---|---|
Density | 23.0 °C | 1.245 g/cm³ Show Supplier Material materials with Density of 1.245 g/cm³ | ASTM D 792 |
Moisture absorption | 23.0 °C | 1 % Show Supplier Material materials with Moisture absorption of 1 % | ASTM D 570 | (23°C/50% RH/24 hrs) |
Water absorption | 23.0 °C | 0.5 % Show Supplier Material materials with Water absorption of 0.5 % | ASTM D 570 | (23°C/24hrs) |
Mechanical
Property | Temperature | Value | Comment |
---|---|---|---|
Elongation | 23.0 °C | 7 % Show Supplier Material materials with Elongation of 7 % | ASTM D 638 | brk, Type I, 5 mm/min |
Flexural modulus | 23.0 °C | 6 GPa Show Supplier Material materials with Flexural modulus of 6 GPa | ASTM D 790 | 2.6 mm/min, 100 mm span |
Flexural strength | 23.0 °C | 194 MPa Show Supplier Material materials with Flexural strength of 194 MPa | ASTM D 790 | yld, 2.6 mm/min, 100 mm span |
Tensile strength | 23.0 °C | 117 MPa Show Supplier Material materials with Tensile strength of 117 MPa | ASTM D 638 | brk, Type I, 5 mm/min |
Thermal
Property | Temperature | Value | Comment |
---|---|---|---|
Coefficient of thermal expansion | 23.0 °C | 3.06E-5 1/K Show Supplier Material materials with Coefficient of thermal expansion of 3.06E-5 1/K | ASTM E 831 | -20°C to 150°C |
Vicat softening temperature | 248 °C Show Supplier Material materials with Vicat softening temperature of 248 °C | ASTM D 1525 | Rate B/50 |
Rheological Properties
Property | Temperature | Value | Comment |
---|---|---|---|
Shrinkage | 23.0 °C | 0.3 % Show Supplier Material materials with Shrinkage of 0.3 % | SABIC method | on tensile bar |
Technological properties
Property | ||
---|---|---|
Application areas | Pump, Heavy Vehicles, Electronic Components, Auto Aftermarket | |
Availability | Asia,Americas | |
Processing methods | Vent Depth: 0.013 to 0.038mm | |
Supplier Disclaimer | While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right. |