General
Property | Temperature | Value | Comment |
---|---|---|---|
Density | 23.0 °C | 1.25 g/cm³ Show Supplier Material materials with Density of 1.25 g/cm³ | ISO 1183 |
Moisture absorption | 23.0 °C | 1.08 % Show Supplier Material materials with Moisture absorption of 1.08 % | ISO 62 | (23°C / 50% RH) |
Water absorption | 23.0 °C | 3.2 % Show Supplier Material materials with Water absorption of 3.2 % | ISO 62-1 | (23°C/saturated) |
Mechanical
Property | Temperature | Value | Comment |
---|---|---|---|
Elongation | 23.0 °C | 2.5 % Show Supplier Material materials with Elongation of 2.5 % | ISO 527 | yield, 5 mm/min |
Flexural modulus | 23.0 °C | 5.2 GPa Show Supplier Material materials with Flexural modulus of 5.2 GPa | ISO 178 | 2 mm/min |
Flexural strength | 23.0 °C | 217 MPa Show Supplier Material materials with Flexural strength of 217 MPa | ISO 178 | break, 2 mm/min |
Tensile strength | 23.0 °C | 95 MPa Show Supplier Material materials with Tensile strength of 95 MPa | ISO 527 | break, 5 mm/min |
Thermal
Property | Temperature | Value | Comment |
---|---|---|---|
Coefficient of thermal expansion | 23.0 °C | 3E-5 1/K Show Supplier Material materials with Coefficient of thermal expansion of 3E-5 1/K | ISO 11359-2 | 23°C to 60°C |
Vicat softening temperature | 252 °C Show Supplier Material materials with Vicat softening temperature of 252 °C | ISO 306 | Rate A/50 |
Rheological Properties
Property | Temperature | Value | Comment |
---|---|---|---|
Shrinkage | 23.0 °C | 0.4 % Show Supplier Material materials with Shrinkage of 0.4 % | SABIC method | 3.2 mm |
Technological properties
Property | ||
---|---|---|
Application areas | Pump, Heavy Vehicles, Electronic Components, Auto Aftermarket | |
Availability | Asia,Americas | |
Processing methods | Drying Temperature: 100 to 110.0°C | |
Supplier Disclaimer | While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right. |