General
Property | Temperature | Value | Comment |
---|---|---|---|
Coefficient of friction | 0.38 - 0.44 [-] Show Supplier Material materials with Coefficient of friction of 0.38 - 0.44 [-] | ||
Coefficient of friction, kinetic | 0.38 [-] Show Supplier Material materials with Coefficient of friction, kinetic of 0.38 [-] | ASTM D 3702 Modified: Manual | |
Coefficient of friction, static | 0.44 [-] Show Supplier Material materials with Coefficient of friction, static of 0.44 [-] | ASTM D 3702 Modified: Manual | |
Relative density | 23.0 °C | 1.4 [-] Show Supplier Material materials with Relative density of 1.4 [-] | ASTM D 792 |
Mechanical
Property | Temperature | Value | Comment |
---|---|---|---|
Elastic modulus | 23.0 °C | 21.5 GPa Show Supplier Material materials with Elastic modulus of 21.5 GPa | ASTM D 638 | 5 mm/min |
Elongation | 23.0 °C | 1.3 % Show Supplier Material materials with Elongation of 1.3 % | ASTM D 638 | brk, Type I, 5 mm/min |
Flexural modulus | 23.0 °C | 17.3 GPa Show Supplier Material materials with Flexural modulus of 17.3 GPa | ASTM D 790 | 1.3 mm/min, 50 mm span |
Flexural strength | 23.0 °C | 283 MPa Show Supplier Material materials with Flexural strength of 283 MPa | ASTM D 790 | brk, 1.3 mm/min, 50 mm span |
Impact strength, Izod notched | 23.0 °C | 56 kJ/m² Show Supplier Material materials with Impact strength, Izod notched of 56 kJ/m² | ASTM D 256 | notched, 23°C |
Impact strength, Izod notched, ASTM | 23.0 °C | 56 J/m Show Supplier Material materials with Impact strength, Izod notched, ASTM of 56 J/m | ASTM D 256 |
Impact strength, Izod unnotched, ASTM | 23.0 °C | 476 J/m Show Supplier Material materials with Impact strength, Izod unnotched, ASTM of 476 J/m | ASTM D 4812 | 23°C |
Tensile strength | 23.0 °C | 216 MPa Show Supplier Material materials with Tensile strength of 216 MPa | ASTM D 638 | brk, Type I, 5 mm/min |
Thermal
Technological properties
Property | ||
---|---|---|
Application areas | Medical Device, Surgical Devices | |
Availability | Europe,Asia,Americas | |
Processing methods | Drying Time: 4 to 6.0hrs | |
Supplier Disclaimer | While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right. |