LNP™ ELCRIN™ 61000IiQ

Want to keep this datasheet? Save it now in your required format

Description

LNP ELCRIN 61000IiQ, utilizing ELCRIN iQ upcycling technology, is a reinforced, impact modified PBT+PC alloy. Added features include PCR content, excellent low temperature impact, chemical resistance, colorability. This grade contains minimum 22% PCR weight content.

This material data has been provided by Sabic.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyTemperatureValueComment

Density

23.0 °C

1.2 g/cm³

Show Supplier Material materials with Density of 1.2 g/cm³

ISO 1183

Moisture absorption

23.0 °C

0.08 %

Show Supplier Material materials with Moisture absorption of 0.08 %

ISO 62 | (23°C / 50% RH)

Relative density

23.0 °C

1.19 [-]

Show Supplier Material materials with Relative density of 1.19 [-]

ASTM D 792

Water absorption

23.0 °C

0.3 %

Show Supplier Material materials with Water absorption of 0.3 %

ISO 62-1 | (23°C/saturated)

Mechanical

PropertyTemperatureValueComment

Elastic modulus

23.0 °C

2 GPa

Show Supplier Material materials with Elastic modulus of 2 GPa

ISO 527 | 1 mm/min

Elongation

23.0 °C

4 %

Show Supplier Material materials with Elongation of 4 %

ISO 527 | yield, 50 mm/min

Flexural modulus

23.0 °C

1.9 GPa

Show Supplier Material materials with Flexural modulus of 1.9 GPa

ISO 178 | 2 mm/min

Flexural strength

23.0 °C

70 MPa

Show Supplier Material materials with Flexural strength of 70 MPa

ISO 178 | yield, 2 mm/min

Impact strength, Charpy notched

23.0 °C

55 kJ/m²

Show Supplier Material materials with Impact strength, Charpy notched of 55 kJ/m²

ISO 179/1eA | V-notch Edgew 80*10*4 sp=62mm, 23°C

Impact strength, Izod notched

23.0 °C

55 kJ/m²

Show Supplier Material materials with Impact strength, Izod notched of 55 kJ/m²

ISO 180/1A | 80*10*4, 23°C

Impact strength, Izod notched, ASTM

23.0 °C

600 J/m

Show Supplier Material materials with Impact strength, Izod notched, ASTM of 600 J/m

ASTM D 256 | notched, -30°C

Instrumented Impact, Total Energy

23.0 °C

50 J

Show Supplier Material materials with Instrumented Impact, Total Energy of 50 J

ASTM D 3763 | 23°C

Tensile strength

23.0 °C

49 MPa

Show Supplier Material materials with Tensile strength of 49 MPa

ISO 527 | yield, 50 mm/min

Thermal

PropertyTemperatureValueComment

Coefficient of thermal expansion

23.0 °C

9E-5 1/K

Show Supplier Material materials with Coefficient of thermal expansion of 9E-5 1/K

ISO 11359-2 | -30°C to 80°C

Coefficient of thermal expansion, transverse

23.0 °C

9.5E-5 1/K

Show Supplier Material materials with Coefficient of thermal expansion, transverse of 9.5E-5 1/K

ISO 11359-2 | -30°C to 80°C

Heat deflection temperature

75 - 99 °C

Show Supplier Material materials with Heat deflection temperature of 75 - 99 °C

Heat deflection temperature, 0.45 MPa

99 °C

Show Supplier Material materials with Heat deflection temperature, 0.45 MPa of 99 °C

ASTM D 648 | 3.2 mm, unannealed

Heat deflection temperature, 1.80 MPa

75 °C

Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 75 °C

ASTM D 648 | 3.2mm, unannealed

Relative temperature index, electrical

75 °C

Show Supplier Material materials with Relative temperature index, electrical of 75 °C

UL 746B

Relative temperature index, mechanical impact

75 °C

Show Supplier Material materials with Relative temperature index, mechanical impact of 75 °C

UL 746B

Relative temperature index, mechanical strength

75 °C

Show Supplier Material materials with Relative temperature index, mechanical strength of 75 °C

UL 746B

Flammability

UL Yellow Card Link: https://iq.ul.com/ul/cert.aspx?ULID=100803460- - <br> UL Recognized, 94HB Flame Class Rating: ≥1.5mm UL 94

Rheological Properties

PropertyTemperatureValueComment

Melt mass-flow rate

13 g/10min

Show Supplier Material materials with Melt mass-flow rate of 13 g/10min

ASTM D 1238 | 250°C/5.0 kgf

Melt volume-flow rate

12 cm³/10min

Show Supplier Material materials with Melt volume-flow rate of 12 cm³/10min

ISO 1133 | MVR at 250°C/5.0 kg

Shrinkage

23.0 °C

0.8 %

Show Supplier Material materials with Shrinkage of 0.8 %

SABIC method | 3.2 mm

Technological properties

Property
Application areas

Automotive , Electronics, Healthcare

Availability

Europe,Asia,Americas

Processing methods

Drying Temperature: 110°C
Drying Time: 4 to 6.0hrs
Drying Time (Cumulative): 8hrs
Maximum Moisture Content: 0.02%
Melt Temperature: 255 to 275.0°C
Nozzle Temperature: 250 to 265.0°C
Front - Zone 3 Temperature: 250 to 270.0°C
Middle - Zone 2 Temperature: 245 to 265.0°C
Rear - Zone 1 Temperature: 240 to 260.0°C
Mold Temperature: 40 to 90.0°C
Back Pressure: 0.3 to 0.7MPa
Screw Speed: 40 to 80.0rpm
Shot to Cylinder Size: 50 to 80.0%
Vent Depth: 0.013 to 0.02mm

Supplier Disclaimer

While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.