General
Property | Temperature | Value | Comment |
---|---|---|---|
Density | 23.0 °C | 1.31 g/cm³ Show Supplier Material materials with Density of 1.31 g/cm³ | ISO 1183 |
Mechanical
Property | Temperature | Value | Comment | ||
---|---|---|---|---|---|
Impact strength, Izod unnotched, ASTM | 23.0 °C | 550 J/m Show Supplier Material materials with Impact strength, Izod unnotched, ASTM of 550 J/m | ASTM D 4812 | 23°C | ||
Elastic modulus | ISO 527 | 1 mm/min | ||||
Elongation | ISO 527 | yield, 5 mm/min | ||||
Flexural modulus | ISO 178 | 2 mm/min | ||||
Flexural strength | ISO 178 | yield, 2 mm/min | ||||
Tensile strength | ISO 527 | break, 5 mm/min |
Thermal
Property | Value | Comment |
---|---|---|
Heat deflection temperature | 55 - 150 °C Show Supplier Material materials with Heat deflection temperature of 55 - 150 °C | |
Heat deflection temperature, 0.45 MPa | 150 °C Show Supplier Material materials with Heat deflection temperature, 0.45 MPa of 150 °C | ASTM D 648 | 3.2 mm, unannealed |
Heat deflection temperature, 1.80 MPa | 55 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 55 °C | ASTM D 648 | 3.2mm, unannealed |
Vicat softening temperature | 207 °C Show Supplier Material materials with Vicat softening temperature of 207 °C | ASTM D 1525 | Rate A/120 |
Rheological Properties
Property | Temperature | Value | Comment |
---|---|---|---|
Melt volume-flow rate | 20 cm³/10min Show Supplier Material materials with Melt volume-flow rate of 20 cm³/10min | ISO 1133 | MVR at 250°C/2.16 kg | |
Shrinkage | 23.0 °C | 1.8 % Show Supplier Material materials with Shrinkage of 1.8 % | SABIC method | on tensile bar |
Technological properties
Property | ||
---|---|---|
Application areas | Automotive , Electronics | |
Availability | Europe,Asia,Americas | |
Processing methods | Drying Temperature: 100 to 120.0°C | |
Supplier Disclaimer | While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right. |