General
Property | Temperature | Value | Comment |
---|---|---|---|
Density | 23.0 °C | 1.42 g/cm³ Show Supplier Material materials with Density of 1.42 g/cm³ | ASTM D 792 |
Moisture absorption | 23.0 °C | 0.07 % Show Supplier Material materials with Moisture absorption of 0.07 % | ISO 62 | (23°C / 50% RH) |
Relative density | 23.0 °C | 1.42 [-] Show Supplier Material materials with Relative density of 1.42 [-] | ASTM D 792 | |
Mechanical
Property | Temperature | Value | Comment |
---|---|---|---|
Elastic modulus | 23.0 °C | 29.2 GPa Show Supplier Material materials with Elastic modulus of 29.2 GPa | ISO 527 | 1 mm/min |
Elongation | 23.0 °C | 1.5 % Show Supplier Material materials with Elongation of 1.5 % | ISO 527 | break |
Flexural modulus | 23.0 °C | 25.4 GPa Show Supplier Material materials with Flexural modulus of 25.4 GPa | ISO 178 |
Flexural strength | 23.0 °C | 412 MPa Show Supplier Material materials with Flexural strength of 412 MPa | ISO 178 |
Impact strength, Charpy notched | 23.0 °C | 8.1 kJ/m² Show Supplier Material materials with Impact strength, Charpy notched of 8.1 kJ/m² | ISO 179/1eA | V-notch Edgew 80*10*3 sp=62mm, 23°C |
Impact strength, Izod notched | 23.0 °C | 9.9 kJ/m² Show Supplier Material materials with Impact strength, Izod notched of 9.9 kJ/m² | ISO 180/1A | 80*10*4, 23°C |
Impact strength, Izod notched, ASTM | 23.0 °C | 97.3 J/m Show Supplier Material materials with Impact strength, Izod notched, ASTM of 97.3 J/m | ASTM D 256 | notched, 23°C |
Impact strength, Izod unnotched | 23.0 °C | 55.6 kJ/m² Show Supplier Material materials with Impact strength, Izod unnotched of 55.6 kJ/m² | ISO 180/1U | unnotched 80*10*4, 23°C |
Impact strength, Izod unnotched, ASTM | 23.0 °C | 860 J/m Show Supplier Material materials with Impact strength, Izod unnotched, ASTM of 860 J/m | ASTM D 4812 | 23°C |
Tensile strength | 23.0 °C | 267.5 MPa Show Supplier Material materials with Tensile strength of 267.5 MPa | ISO 527 | break |
Thermal
Property | Temperature | Value | Comment |
---|---|---|---|
Coefficient of thermal expansion | 23.0 °C | 9.3E-6 1/K Show Supplier Material materials with Coefficient of thermal expansion of 9.3E-6 1/K | ASTM E 831 | -40°C to 120°C |
Coefficient of thermal expansion, transverse | 23.0 °C | 3.4E-5 1/K Show Supplier Material materials with Coefficient of thermal expansion, transverse of 3.4E-5 1/K | ASTM E 831 | -40°C to 120°C |
Rheological Properties
Technological properties
Property | ||
---|---|---|
Application areas | Oil/Gas, Electronic Components, Enclosures, Heavy Vehicles, Air Cabin Interiors | |
Availability | Europe,Asia,Americas | |
Processing methods | Drying Temperature: 150°C | |
Supplier Disclaimer | While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right. |