General
Property | Temperature | Value | Comment |
---|---|---|---|
Density | 23.0 °C | 1.36 g/cm³ Show Supplier Material materials with Density of 1.36 g/cm³ | ISO 1183 |
Limiting oxygen index | 23.0 °C | 25 % Show Supplier Material materials with Limiting oxygen index of 25 % | |
Moisture absorption | 23.0 °C | 1.53 % Show Supplier Material materials with Moisture absorption of 1.53 % | ISO 62 | (23°C / 50% RH) |
Water absorption | 23.0 °C | 6.5 % Show Supplier Material materials with Water absorption of 6.5 % | ISO 62-1 | (23°C/saturated) |
Mechanical
Property | Temperature | Value | Comment |
---|---|---|---|
Elastic modulus | 23.0 °C | 9 GPa Show Supplier Material materials with Elastic modulus of 9 GPa | ISO 527 | 1 mm/min |
Elongation | 23.0 °C | 3.3 % Show Supplier Material materials with Elongation of 3.3 % | ISO 527 | break, 5 mm/min |
Flexural modulus | 23.0 °C | 8 GPa Show Supplier Material materials with Flexural modulus of 8 GPa | ISO 178 | 2 mm/min |
Flexural strength | 23.0 °C | 203 MPa Show Supplier Material materials with Flexural strength of 203 MPa | ISO 178 |
Hardness, Rockwell L | 23.0 °C | 112 [-] Show Supplier Material materials with Hardness, Rockwell L of 112 [-] | ISO 2039-2 |
Impact strength, Charpy notched | 23.0 °C | 9 kJ/m² Show Supplier Material materials with Impact strength, Charpy notched of 9 kJ/m² | ISO 179/1eA | V-notch Edgew 80*10*4 sp=62mm, -30°C |
Impact strength, Charpy unnotched | 23.0 °C | 75 kJ/m² Show Supplier Material materials with Impact strength, Charpy unnotched of 75 kJ/m² | ISO 179/1eU | Unnotch Edgew 80*10*4 sp=62mm, -30°C |
Impact strength, Izod notched | 23.0 °C | 11 kJ/m² Show Supplier Material materials with Impact strength, Izod notched of 11 kJ/m² | ISO 180/1A | 80*10*4, 23°C |
Impact strength, Izod notched, ASTM | 23.0 °C | 117 J/m Show Supplier Material materials with Impact strength, Izod notched, ASTM of 117 J/m | ASTM D 256 | notched, 23°C |
Impact strength, Izod unnotched | 23.0 °C | 55 kJ/m² Show Supplier Material materials with Impact strength, Izod unnotched of 55 kJ/m² | ISO 180/1U | unnotched 80*10*4 |
Impact strength, Izod unnotched, ASTM | 23.0 °C | 827 J/m Show Supplier Material materials with Impact strength, Izod unnotched, ASTM of 827 J/m | ASTM D 4812 | 23°C |
Instrumented Impact, at Peak | 23.0 °C | 9 J Show Supplier Material materials with Instrumented Impact, at Peak of 9 J | ASTM D 3763 | 23°C |
Tensile strength | 23.0 °C | 144 MPa Show Supplier Material materials with Tensile strength of 144 MPa | ISO 527 | break, 5 mm/min |
Thermal
Property | Temperature | Value | Comment | ||
---|---|---|---|---|---|
Coefficient of thermal expansion | 23.0 °C | 3.06E-5 1/K Show Supplier Material materials with Coefficient of thermal expansion of 3.06E-5 1/K | ISO 11359-2 | -40°C to 40°C | ||
Coefficient of thermal expansion, transverse | 23.0 °C | 6.72E-5 1/K Show Supplier Material materials with Coefficient of thermal expansion, transverse of 6.72E-5 1/K | ISO 11359-2 | -40°C to 40°C | ||
Heat deflection temperature | 203 - 220 °C Show Supplier Material materials with Heat deflection temperature of 203 - 220 °C | ||||
Heat deflection temperature, 0.45 MPa | 220 °C Show Supplier Material materials with Heat deflection temperature, 0.45 MPa of 220 °C | ISO 75/Be | Edgew 120*10*4 sp=100mm | |||
Heat deflection temperature, 1.80 MPa | 203 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 203 °C | ISO 75/Af | Flatw 80*10*4 sp=64mm | |||
Thermal conductivity | 23.0 °C | 0.33 W/(m·K) Show Supplier Material materials with Thermal conductivity of 0.33 W/(m·K) | ISO 8302 | ||
Vicat softening temperature | 215 °C Show Supplier Material materials with Vicat softening temperature of 215 °C | ISO 306 | Rate B/120 | |||
Flammability | UL Compliant, 94HB Flame Class Rating: 1.5mm UL 94 by SABIC-IP <br> Glow Wire Flammability Index 650°C, passes at: 2mm IEC 60695-2-12 |
Electrical
Property | Temperature | Value | Comment |
---|---|---|---|
Comparative tracking index | 23.0 °C | 500 V Show Supplier Material materials with Comparative tracking index of 500 V | IEC 60112 | |
Dielectric constant, 1MHz | 23.0 °C | 3.4 [-] Show Supplier Material materials with Dielectric constant, 1MHz of 3.4 [-] | IEC 60250 |
Dielectric constant, 60Hz | 23.0 °C | 3.6 [-] Show Supplier Material materials with Dielectric constant, 60Hz of 3.6 [-] | IEC 60250 | 50/60 Hz |
Dielectric strength | 23.0 °C | 20 kV/mm Show Supplier Material materials with Dielectric strength of 20 kV/mm | IEC 60243-1 | in oil, 3.2 mm, |
Dissipation factor, 1MHz | 23.0 °C | 0.02 [-] Show Supplier Material materials with Dissipation factor, 1MHz of 0.02 [-] | IEC 60250 |
Dissipation factor, 50Hz | 23.0 °C | 6.1E-3 [-] Show Supplier Material materials with Dissipation factor, 50Hz of 6.1E-3 [-] | IEC 60250 | 50/60 Hz |
Sheet resistivity, ROA | 23.0 °C | 1.00E+16 Ω Show Supplier Material materials with Sheet resistivity, ROA of 1.00E+16 Ω | >, IEC 60093 |
Volume resistivity | 23.0 °C | 1.00E+16 Ω·cm Show Supplier Material materials with Volume resistivity of 1.00E+16 Ω·cm | >, IEC 60093 |
Rheological Properties
Technological properties
Property | ||
---|---|---|
Application areas | Lighting | |
Availability | Europe,Asia,Americas | |
Processing methods | Drying Temperature: 80°C | |
Supplier Disclaimer | While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right. |