General
Property | Temperature | Value | Comment |
---|---|---|---|
Density | 23.0 °C | 1.61 g/cm³ Show Supplier Material materials with Density of 1.61 g/cm³ | ISO 1183 |
Mechanical
Property | Temperature | Value | Comment |
---|---|---|---|
Elastic modulus | 23.0 °C | 14 GPa Show Supplier Material materials with Elastic modulus of 14 GPa | ISO 527 | 1 mm/min |
Elongation | 23.0 °C | 0.8 % Show Supplier Material materials with Elongation of 0.8 % | ISO 527 | break, 5 mm/min |
Flexural modulus | 23.0 °C | 14.3 GPa Show Supplier Material materials with Flexural modulus of 14.3 GPa | ISO 178 | 2 mm/min |
Flexural strength | 23.0 °C | 96 MPa Show Supplier Material materials with Flexural strength of 96 MPa | ISO 178 | break, 2 mm/min |
Impact strength, Izod notched | 23.0 °C | 3 kJ/m² Show Supplier Material materials with Impact strength, Izod notched of 3 kJ/m² | ISO 180/1A | notched 80*10*4, 23°C |
Impact strength, Izod notched, ASTM | 23.0 °C | 30 J/m Show Supplier Material materials with Impact strength, Izod notched, ASTM of 30 J/m | ASTM D 256 |
Impact strength, Izod unnotched | 23.0 °C | 6 kJ/m² Show Supplier Material materials with Impact strength, Izod unnotched of 6 kJ/m² | ISO 180/1U | unnotched 80*10*4, 23°C |
Impact strength, Izod unnotched, ASTM | 23.0 °C | 73 J/m Show Supplier Material materials with Impact strength, Izod unnotched, ASTM of 73 J/m | ASTM D 4812 | 23°C |
Tensile strength | 23.0 °C | 73 MPa Show Supplier Material materials with Tensile strength of 73 MPa | ISO 527 | break, 5 mm/min |
Thermal
Property | Temperature | Value | Comment | ||
---|---|---|---|---|---|
Coefficient of thermal expansion | 23.0 °C | 1.4E-5 1/K Show Supplier Material materials with Coefficient of thermal expansion of 1.4E-5 1/K | ISO 11359-2 | -30°C to 80°C | ||
Coefficient of thermal expansion, transverse | 23.0 °C | 4.77E-5 1/K Show Supplier Material materials with Coefficient of thermal expansion, transverse of 4.77E-5 1/K | ISO 11359-2 | 23°C to 80°C | ||
Heat deflection temperature | 201 °C Show Supplier Material materials with Heat deflection temperature of 201 °C | ||||
Heat deflection temperature, 1.80 MPa | 201 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 201 °C | ISO 75/Af | Flatw 80*10*4 sp=64mm | |||
Thermal conductivity | 23.0 °C | 18 W/(m·K) Show Supplier Material materials with Thermal conductivity of 18 W/(m·K) | ISO 22007-2 | 60*60*3mm plaque | ||
Thermal conductivity, through-plane | 23.0 °C | 1.5 W/(m·K) Show Supplier Material materials with Thermal conductivity, through-plane of 1.5 W/(m·K) | ISO 22007-2 | 60*60*3mm plaque | ||
Flammability | Glow Wire Flammability Index 650°C, passes at: 1mm IEC 60695-2-12 <br> Glow Wire Flammability Index 850°C, passes at: 1mm IEC 60695-2-12 <br> Glow Wire Flammability Index 960°C, passes at: 1.6mm IEC 60695-2-12 <br> Glow Wire Flammability Index 960°C, passes at: 1.6mm IEC 60695-2-12 <br> Glow Wire Ignitability Temperature, 1.0 mm: 825°C IEC 60695-2-13 |
Electrical
Property | Temperature | Value | Comment |
---|---|---|---|
Sheet resistivity, ROA | 23.0 °C | 1.05E+6 Ω Show Supplier Material materials with Sheet resistivity, ROA of 1.05E+6 Ω | ASTM D 257 |
Rheological Properties
Technological properties
Property | ||
---|---|---|
Application areas | LED Lighting | |
Availability | Europe,Asia | |
Processing methods | Drying Temperature: 80 to 90.0°C | |
Supplier Disclaimer | While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right. |