General
Property | Temperature | Value | Comment |
---|---|---|---|
Density | 23.0 °C | 1.69 g/cm³ Show Supplier Material materials with Density of 1.69 g/cm³ | ASTM D 792 |
Mechanical
Property | Temperature | Value | Comment |
---|---|---|---|
Elastic modulus | 23.0 °C | 21.4 GPa Show Supplier Material materials with Elastic modulus of 21.4 GPa | ISO 527 | 1 mm/min |
Elongation | 23.0 °C | 1.9 % Show Supplier Material materials with Elongation of 1.9 % | ISO 527 | break, 5 mm/min |
Flexural modulus | 23.0 °C | 20.3 GPa Show Supplier Material materials with Flexural modulus of 20.3 GPa | ISO 178 | 2 mm/min |
Flexural strength | 23.0 °C | 383 MPa Show Supplier Material materials with Flexural strength of 383 MPa | ISO 178 |
Impact strength, Izod notched | 23.0 °C | 15 kJ/m² Show Supplier Material materials with Impact strength, Izod notched of 15 kJ/m² | ISO 180/1A | 80*10*4, 23°C |
Impact strength, Izod notched, ASTM | 23.0 °C | 182 J/m Show Supplier Material materials with Impact strength, Izod notched, ASTM of 182 J/m | ASTM D 256 |
Impact strength, Izod unnotched, ASTM | 23.0 °C | 1130 J/m Show Supplier Material materials with Impact strength, Izod unnotched, ASTM of 1130 J/m | ASTM D 4812 | 23°C |
Tensile strength | 23.0 °C | 243 MPa Show Supplier Material materials with Tensile strength of 243 MPa | ISO 527 | break, 5 mm/min |
Thermal
Rheological Properties
Property | Temperature | Value | Comment |
---|---|---|---|
Shrinkage | 23.0 °C | 0.4 % Show Supplier Material materials with Shrinkage of 0.4 % | ASTM D 955 | 24 hrs |
Technological properties
Property | ||
---|---|---|
Application areas | Surgical Devices | |
Availability | Asia,Americas | |
Supplier Disclaimer | While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right. |