NORYL™ Resin N225X - Americas

Want to keep this datasheet? Save it now in your required format

Description

NORYL™ N225X resin is a non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS). This injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of 5VA at 3mm and V0 at 1.5mm along with a UL746C Outdoor Suitability rating of F1. NORYL N225X resin offers good dielectric strength and strong electrical performance in addition to low moisture absorption and dimensional stability, This material is an excellent candidate for both indoor and outdoor electrical applications.

This material data has been provided by Sabic.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

All categories

Available suppliers

SABIC

MANUFACTURER, PROCESSOR AND DISTRIBUTOR

Additional services:

Our six Global Application Technology development hubs add value to our customers’ entire product development cycles in a wide range of industries. We provide our customers with advanced design, predictive engineering, testing, validation and processing services. Our COLORXPRESS™ services team provides global color matching and maintenance. Our Fast Formulation services provide initial assessments within five business days and custom-made samples typically in four to six weeks.

Applications

Electrical Engineering

Electronics

Display Devices

Automotive

General Automotive Parts

Construction

Water Management

Consumer Goods

Domestic Electrical Appliances

Show all

Materials by this supplier

LNP™ THERMOCOMP™ Compound WF006H

LNP™ THERMOCOMP™ Compound PF00C - Europe

LNP™ THERMOCOMP™ Compound JF006E - Europe

LEXAN™ Copolymer FXE1414T - Americas

LNP™ ELCRES™ CRX9411

See all materials by this supplier

Properties

General

Property	Temperature	Value	Comment
Relative density	23.0 °C	1.11 [-] Show Supplier Material materials with Relative density of 1.11 [-]	ASTM D 792 \|

Mechanical

Property	Temperature	Value	Comment
Elongation	23.0 °C	17 % Show Supplier Material materials with Elongation of 17 %	ASTM D 638 \| brk, Type I, 50 mm/min
Flexural modulus	23.0 °C	2.5 GPa Show Supplier Material materials with Flexural modulus of 2.5 GPa	ASTM D 790 \| 2.6 mm/min, 100 mm span
Flexural strength	23.0 °C	99 MPa Show Supplier Material materials with Flexural strength of 99 MPa	ASTM D 790 \| yld, 2.6 mm/min, 100 mm span
Impact strength, Izod notched	23.0 °C	186 kJ/m² Show Supplier Material materials with Impact strength, Izod notched of 186 kJ/m²	ASTM D 256 \| notched, 23°C
Impact strength, Izod notched, ASTM	23.0 °C	96 J/m Show Supplier Material materials with Impact strength, Izod notched, ASTM of 96 J/m	ASTM D 256 \| notched, -30°C
Instrumented Impact, at Peak	23.0 °C	39 J Show Supplier Material materials with Instrumented Impact, at Peak of 39 J	ASTM D 3763 \| 23°C
Tensile strength	23.0 °C	66 MPa Show Supplier Material materials with Tensile strength of 66 MPa	ASTM D 638 \| yld, Type I, 50 mm/min

Thermal

Property	Value	Comment
Heat deflection temperature	99 - 109 °C Show Supplier Material materials with Heat deflection temperature of 99 - 109 °C
Heat deflection temperature, 0.45 MPa	109 °C Show Supplier Material materials with Heat deflection temperature, 0.45 MPa of 109 °C	ASTM D 648 \| 6.4 mm, unannealed
Heat deflection temperature, 1.80 MPa	99 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 99 °C	ASTM D 648 \| 6.4 mm, unannealed
Relative temperature index, electrical	95 °C Show Supplier Material materials with Relative temperature index, electrical of 95 °C	UL 746B
Relative temperature index, mechanical impact	80 °C Show Supplier Material materials with Relative temperature index, mechanical impact of 80 °C	UL 746B
Relative temperature index, mechanical strength	95 °C Show Supplier Material materials with Relative temperature index, mechanical strength of 95 °C	UL 746B
Vicat softening temperature	128 °C Show Supplier Material materials with Vicat softening temperature of 128 °C	ASTM D 1525 \| Rate B/50
Flammability	UL Recognized, 94HB Flame Class Rating: ≥0.4mm UL 94 <br> Radiant Panel Listing: TRUE- UL Tested <br> UL Recognized, 94V-0 Flame Class Rating: ≥1.5mm UL 94 <br> UL Recognized, 94-5VA Flame Class Rating: ≥3mm UL 94 <br> UV-light, water exposure/immersion: F1- UL 746C <br> UL Yellow Card Link: https://iq.ul.com/ul/cert.aspx?ULID=221178- -

Electrical

Property	Temperature	Value	Comment
Comparative tracking index	23.0 °C	1 V Show Supplier Material materials with Comparative tracking index of 1 V	UL 746A \| (UL) {PLC}
Dielectric constant, 1MHz	23.0 °C	2.55 [-] Show Supplier Material materials with Dielectric constant, 1MHz of 2.55 [-]	ASTM D 150
Dielectric constant, 60Hz	23.0 °C	2.69 [-] Show Supplier Material materials with Dielectric constant, 60Hz of 2.69 [-]	ASTM D 150 \| 50/60 Hz
Dielectric strength	23.0 °C	16.2 kV/mm Show Supplier Material materials with Dielectric strength of 16.2 kV/mm	ASTM D 149 \| in oil, 3.2 mm
Dissipation factor, 1MHz	23.0 °C	7E-3 [-] Show Supplier Material materials with Dissipation factor, 1MHz of 7E-3 [-]	ASTM D 150
Dissipation factor, 50Hz	23.0 °C	0.01 [-] Show Supplier Material materials with Dissipation factor, 50Hz of 0.01 [-]	ASTM D 150 \| 50/60 Hz
High Amp Arc Ignition	23.0 °C	1.5 mm Show Supplier Material materials with High Amp Arc Ignition of 1.5 mm	≥, UL 746A \| PLC 0
High Volt Arc Track Rate	23.0 °C	4 PLC Code Show Supplier Material materials with High Volt Arc Track Rate of 4 PLC Code	UL 746A \| (PLC)
Hot-Wire Ignition	23.0 °C	6 mm Show Supplier Material materials with Hot-Wire Ignition of 6 mm	≥, UL 746A \| PLC 0
Sheet resistivity, ROA	23.0 °C	1.00E+14 Ω Show Supplier Material materials with Sheet resistivity, ROA of 1.00E+14 Ω	>, ASTM D 257
Volume resistivity	23.0 °C	2.80E+16 Ω·cm Show Supplier Material materials with Volume resistivity of 2.80E+16 Ω·cm	ASTM D 257

Rheological Properties

Property	Temperature	Value	Comment
Shrinkage	23.0 °C	0.5 % Show Supplier Material materials with Shrinkage of 0.5 %	SABIC method \| 3.2 mm
Shrinkage, transverse	23.0 °C	0.5 % Show Supplier Material materials with Shrinkage, transverse of 0.5 %	SABIC method \| 3.2 mm

Technological properties

Property
Application areas	EV/HEV Battery, Food Processor, Enclosures, Electronic Components, Circuit Protection, Data Management, Data Transfer, Document Handling, Meter Gas, Respiratory, Security/Detection, Small Appliance, Power Manangement, Wiring Devices, Wireless Communications
Availability	Americas
Processing methods	Maximum Moisture Content: 0.02% Rear - Zone 1 Temperature: 225 to 275.0°C Screw Speed: 20 to 100.0rpm Mold Temperature: 70 to 95.0°C Middle - Zone 2 Temperature: 240 to 280.0°C Drying Temperature: 95 to 100.0°C Shot to Cylinder Size: 30 to 70.0% Vent Depth: 0.038 to 0.051mm Melt Temperature: 260 to 290.0°C Front - Zone 3 Temperature: 250 to 290.0°C Drying Time: 3 to 4.0hrs Nozzle Temperature: 260 to 290.0°C Drying Time (Cumulative): 8hrs Back Pressure: 0.3 to 0.7MPa
Supplier Disclaimer	While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.