NORYL™ Resin HS2000X - Americas

Want to keep this datasheet? Save it now in your required format

Description

NORYL™ HS2000X resin is a 17% mineral reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS). This injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of 5VA at 2mm and V0 at 1.5m along with UL746C Outdoor Suitability rating of F1. NORYL HS2000X resin exhibits strong electrical performance, dimensional stability, very low moisture absorption, and hydrolytic stability. This material is an excellent candidate for electronic / electrical indoor and outdoor applications including air conditioner parts, smoke detector covers, pool + spa pump parts and housings.

This material data has been provided by Sabic.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

All categories

Available suppliers

SABIC

MANUFACTURER, PROCESSOR AND DISTRIBUTOR

Additional services:

Our six Global Application Technology development hubs add value to our customers’ entire product development cycles in a wide range of industries. We provide our customers with advanced design, predictive engineering, testing, validation and processing services. Our COLORXPRESS™ services team provides global color matching and maintenance. Our Fast Formulation services provide initial assessments within five business days and custom-made samples typically in four to six weeks.

Applications

Energy

Electrical Engineering

Electronics

Display Devices

Construction

Lighting

Packaging

Water Management

Defense

Consumer Goods

Domestic Electrical Appliances

Show all

Materials by this supplier

LNP™ THERMOCOMP™ Compound WF006H

LNP™ THERMOCOMP™ Compound PF00C - Europe

LNP™ THERMOCOMP™ Compound JF006E - Europe

LEXAN™ Copolymer FXE1414T - Americas

LNP™ ELCRES™ CRX9411

See all materials by this supplier

Properties

General

Property	Temperature	Value	Comment
Relative density	23.0 °C	1.25 [-] Show Supplier Material materials with Relative density of 1.25 [-]	ASTM D 792 \|

Mechanical

Property	Temperature	Value	Comment
Elastic modulus	23.0 °C	4 GPa Show Supplier Material materials with Elastic modulus of 4 GPa	ISO 527 \| 1 mm/min
Elongation	23.0 °C	3.7 % Show Supplier Material materials with Elongation of 3.7 %	ISO 527 \| yield
Flexural modulus	23.0 °C	3.8 GPa Show Supplier Material materials with Flexural modulus of 3.8 GPa	ISO 178
Flexural strength	23.0 °C	117 MPa Show Supplier Material materials with Flexural strength of 117 MPa	ISO 178
Impact strength, Charpy notched	23.0 °C	10 kJ/m² Show Supplier Material materials with Impact strength, Charpy notched of 10 kJ/m²	ISO 179/2C \| 23°C
Impact strength, Izod notched	23.0 °C	9 kJ/m² Show Supplier Material materials with Impact strength, Izod notched of 9 kJ/m²	ISO 180/1A \| notched 80104, 23°C
Impact strength, Izod notched, ASTM	23.0 °C	131 J/m Show Supplier Material materials with Impact strength, Izod notched, ASTM of 131 J/m	ASTM D 256 \| notched, 23°C
Impact strength, Izod unnotched, ASTM	23.0 °C	2230 J/m Show Supplier Material materials with Impact strength, Izod unnotched, ASTM of 2230 J/m	ASTM D 4812 \| 23°C
Instrumented Impact, Total Energy	23.0 °C	443 J Show Supplier Material materials with Instrumented Impact, Total Energy of 443 J	ASTM D 3763 \| 23°C
Tensile strength	23.0 °C	57 MPa Show Supplier Material materials with Tensile strength of 57 MPa	ISO 527 \| break

Thermal

Property	Temperature	Value	Comment
Coefficient of thermal expansion	23.0 °C	7.06E-5 1/K Show Supplier Material materials with Coefficient of thermal expansion of 7.06E-5 1/K	ASTM E 831 \| -40°C to 40°C
Coefficient of thermal expansion, transverse	23.0 °C	7.76E-5 1/K Show Supplier Material materials with Coefficient of thermal expansion, transverse of 7.76E-5 1/K	ASTM E 831 \| -40°C to 40°C
Glow Wire Flammability Index		960 °C Show Supplier Material materials with Glow Wire Flammability Index of 960 °C
Glow Wire Ignition Temperature		800 °C Show Supplier Material materials with Glow Wire Ignition Temperature of 800 °C	IEC 60695-2-13 \| 3.0 mm
Heat deflection temperature		111 - 126 °C Show Supplier Material materials with Heat deflection temperature of 111 - 126 °C
Heat deflection temperature, 0.45 MPa		126 °C Show Supplier Material materials with Heat deflection temperature, 0.45 MPa of 126 °C	ISO 75/Be \| Edgew 120104 sp=100mm
Heat deflection temperature, 1.80 MPa		111 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 111 °C	ISO 75/Ae \| Edgew 120104 sp=100mm
Relative temperature index, electrical		100 °C Show Supplier Material materials with Relative temperature index, electrical of 100 °C	UL 746B
Relative temperature index, mechanical impact		85 °C Show Supplier Material materials with Relative temperature index, mechanical impact of 85 °C	UL 746B
Relative temperature index, mechanical strength		100 °C Show Supplier Material materials with Relative temperature index, mechanical strength of 100 °C	UL 746B
Vicat softening temperature		132 °C Show Supplier Material materials with Vicat softening temperature of 132 °C	ISO 306 \| Rate B/50
Flammability	UL Recognized, 94-5VA Flame Class Rating: ≥2mm UL 94 <br> UL Recognized, 94V-0 Flame Class Rating: ≥1.5mm UL 94 <br> Radiant Panel Listing: TRUE- UL Tested <br> UV-light, water exposure/immersion: F1- UL 746C <br> Glow Wire Flammability Index, 1.0 mm: 960°C IEC 60695-2-12 <br> UL Yellow Card Link: https://iq.ul.com/ul/cert.aspx?ULID=221170- - <br> Glow Wire Ignitability Temperature, 1.0 mm: 850°C IEC 60695-2-13

Electrical

Property	Temperature	Value	Comment
Comparative tracking index	23.0 °C	2 V Show Supplier Material materials with Comparative tracking index of 2 V	UL 746A \| (UL) {PLC}
Dielectric constant, 1MHz	23.0 °C	2.7 [-] Show Supplier Material materials with Dielectric constant, 1MHz of 2.7 [-]	ASTM D 150
Dielectric constant, 60Hz	23.0 °C	2.89 [-] Show Supplier Material materials with Dielectric constant, 60Hz of 2.89 [-]	ASTM D 150 \| 50/60 Hz
Dielectric strength	23.0 °C	17.3 kV/mm Show Supplier Material materials with Dielectric strength of 17.3 kV/mm	ASTM D 149 \| in oil, 3.2 mm
Dissipation factor, 1MHz	23.0 °C	4.4E-3 [-] Show Supplier Material materials with Dissipation factor, 1MHz of 4.4E-3 [-]	ASTM D 150
Dissipation factor, 50Hz	23.0 °C	0.02 [-] Show Supplier Material materials with Dissipation factor, 50Hz of 0.02 [-]	ASTM D 150 \| 50/60 Hz
High Amp Arc Ignition	23.0 °C	1.5 mm Show Supplier Material materials with High Amp Arc Ignition of 1.5 mm	≥, UL 746A \| PLC 3
High Volt Arc Track Rate	23.0 °C	3 PLC Code Show Supplier Material materials with High Volt Arc Track Rate of 3 PLC Code	UL 746A \| (PLC)
Hot-Wire Ignition	23.0 °C	1.5 mm Show Supplier Material materials with Hot-Wire Ignition of 1.5 mm	≥, UL 746A \| PLC 0
Sheet resistivity, ROA	23.0 °C	1.00E+16 Ω Show Supplier Material materials with Sheet resistivity, ROA of 1.00E+16 Ω	>, ASTM D 257
Volume resistivity	23.0 °C	1.20E+16 Ω·cm Show Supplier Material materials with Volume resistivity of 1.20E+16 Ω·cm	ASTM D 257

Rheological Properties

Property	Temperature	Value	Comment
Melt mass-flow rate		7.6 g/10min Show Supplier Material materials with Melt mass-flow rate of 7.6 g/10min	ASTM D 1238 \| 280°C/5.0 kgf
Melt volume-flow rate		6 cm³/10min Show Supplier Material materials with Melt volume-flow rate of 6 cm³/10min	ISO 1133 \| MVR at 300°C/5.0 kg
Shrinkage	23.0 °C	0.5 % Show Supplier Material materials with Shrinkage of 0.5 %	SABIC method \| 3.2 mm

Technological properties

Property
Application areas	Medical Device, LED Lighting, Laundry Dryer, Meter Gas, Personal Computing, Non-LED Lighting, Oil/Gas, Security/Detection, Respiratory, Small Appliance, Power Manangement, Wireless Communications, Wiring Devices, Wearables, Washing Machine, Building Accessory, Battery Cell, Circuit Protection, Air Conditioning, Document Handling, Displays, Dishwasher, Data Transfer, Electronic Components, Enclosure/Housing/Cover, Enclosures, Individual Equiptment, Hygiene/Personal Care, Furnace/Heater, Food Processor
Availability	Americas
Processing methods	Shot to Cylinder Size: 30 to 70.0% Screw Speed: 20 to 100.0rpm Drying Time (Cumulative): 8hrs Maximum Moisture Content: 0.02% Rear - Zone 1 Temperature: 250 to 300.0°C Middle - Zone 2 Temperature: 260 to 305.0°C Melt Temperature: 280 to 310.0°C Back Pressure: 0.3 to 0.7MPa Nozzle Temperature: 280 to 310.0°C Front - Zone 3 Temperature: 270 to 310.0°C Drying Time: 3 to 4.0hrs Mold Temperature: 75 to 105.0°C Drying Temperature: 105 to 110.0°C
Supplier Disclaimer	While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.