NORYL™ Resin V0150B - Asia

Want to keep this datasheet? Save it now in your required format

Description

NORYL™ V0150B resin is a non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS). This injection moldable contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of V0 at 1.5mm along with a UL746C Outdoor Suitability rating of F1. exhibits good low temperature impact resistance, damp heat performance, low moisture absorption and good dimensional stability. NORYL V0150B resin is an excellent candidate for parts that are exposed to tough outdoor environments, such as Solar / Photovoltaic (PV) junction boxes and outdoor housings and enclosures.

This material data has been provided by Sabic.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Available suppliers

SABIC

MANUFACTURER, PROCESSOR AND DISTRIBUTOR

Additional services:

Our six Global Application Technology development hubs add value to our customers’ entire product development cycles in a wide range of industries. We provide our customers with advanced design, predictive engineering, testing, validation and processing services. Our COLORXPRESS™ services team provides global color matching and maintenance. Our Fast Formulation services provide initial assessments within five business days and custom-made samples typically in four to six weeks.

Applications

Electrical Engineering

Electronics

Display Devices

Construction

Lighting

Water Management

Defense

Consumer Goods

Domestic Electrical Appliances

General Appliances

Show all

Materials by this supplier

LNP™ THERMOCOMP™ Compound WF006H

LNP™ THERMOCOMP™ Compound PF00C - Europe

LNP™ THERMOCOMP™ Compound JF006E - Europe

LEXAN™ Copolymer FXE1414T - Americas

LNP™ ELCRES™ CRX9411

See all materials by this supplier

Properties

General

Property	Temperature	Value	Comment
Density	23.0 °C	1.11 g/cm³ Show Supplier Material materials with Density of 1.11 g/cm³	ISO 1183
Limiting oxygen index	23.0 °C	32 % Show Supplier Material materials with Limiting oxygen index of 32 %
Moisture absorption	23.0 °C	0.06 % Show Supplier Material materials with Moisture absorption of 0.06 %	ISO 62 \| (23°C / 50% RH)
Relative density	23.0 °C	1.11 [-] Show Supplier Material materials with Relative density of 1.11 [-]	ASTM D 792
Water absorption	23.0 °C	0.18 % Show Supplier Material materials with Water absorption of 0.18 %	ISO 62-1 \| (23°C/saturated)

Mechanical

Property	Temperature	Value	Comment
Elastic modulus	23.0 °C	2.5 GPa Show Supplier Material materials with Elastic modulus of 2.5 GPa	ISO 527 \| 1 mm/min
Elongation	23.0 °C	10 % Show Supplier Material materials with Elongation of 10 %	ISO 527 \| break, 50 mm/min
Flexural modulus	23.0 °C	2.4 GPa Show Supplier Material materials with Flexural modulus of 2.4 GPa	ISO 178 \| 2 mm/min
Flexural strength	23.0 °C	110 MPa Show Supplier Material materials with Flexural strength of 110 MPa	ISO 178 \| yield, 2 mm/min
Hardness, Ball Indentation	23.0 °C	113 MPa Show Supplier Material materials with Hardness, Ball Indentation of 113 MPa	ISO 2039-1 \| H358/30
Impact strength, Charpy notched	23.0 °C	14 kJ/m² Show Supplier Material materials with Impact strength, Charpy notched of 14 kJ/m²	ISO 179/1eA \| V-notch Edgew, 23°C, 80104 sp=62mm
Impact strength, Izod notched	23.0 °C	5 kJ/m² Show Supplier Material materials with Impact strength, Izod notched of 5 kJ/m²	ISO 180/1A \| notched 80104, -30°C
Impact strength, Izod notched, ASTM	23.0 °C	180 J/m Show Supplier Material materials with Impact strength, Izod notched, ASTM of 180 J/m	ASTM D 256 \| notched, -30°C
Instrumented Impact, Total Energy	23.0 °C	50 J Show Supplier Material materials with Instrumented Impact, Total Energy of 50 J	ASTM D 3763 \| 23°C
Taber Abrasion	23.0 °C	35 mg/1000cy Show Supplier Material materials with Taber Abrasion of 35 mg/1000cy	SABIC method \| CS-17, 1 kg
Tensile strength	23.0 °C	55 MPa Show Supplier Material materials with Tensile strength of 55 MPa	ISO 527 \| break, 50 mm/min

Thermal

Property	Temperature	Value	Comment
Ball pressure temperature		140 °C Show Supplier Material materials with Ball pressure temperature of 140 °C	IEC 60695-10-2 \| approximate maximum
Coefficient of thermal expansion	23.0 °C	7E-5 1/K Show Supplier Material materials with Coefficient of thermal expansion of 7E-5 1/K	ISO 11359-2 \| 23°C to 80°C
Coefficient of thermal expansion, transverse	23.0 °C	9E-5 1/K Show Supplier Material materials with Coefficient of thermal expansion, transverse of 9E-5 1/K	ISO 11359-2 \| 23°C to 80°C
Glow Wire Flammability Index		960 °C Show Supplier Material materials with Glow Wire Flammability Index of 960 °C
Glow Wire Ignition Temperature		775 °C Show Supplier Material materials with Glow Wire Ignition Temperature of 775 °C	IEC 60695-2-13 \| 3.0 mm
Heat deflection temperature		130 - 140 °C Show Supplier Material materials with Heat deflection temperature of 130 - 140 °C
Heat deflection temperature, 0.45 MPa		140 °C Show Supplier Material materials with Heat deflection temperature, 0.45 MPa of 140 °C	ISO 75/Be \| Edgew 120104 sp=100mm
Heat deflection temperature, 1.80 MPa		130 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 130 °C	ISO 75/Ae \| Edgew 120104 sp=100mm
Relative temperature index, electrical		110 °C Show Supplier Material materials with Relative temperature index, electrical of 110 °C	UL 746B
Relative temperature index, mechanical impact		105 °C Show Supplier Material materials with Relative temperature index, mechanical impact of 105 °C	UL 746B
Relative temperature index, mechanical strength		115 °C Show Supplier Material materials with Relative temperature index, mechanical strength of 115 °C	UL 746B
Thermal conductivity	23.0 °C	0.27 W/(m·K) Show Supplier Material materials with Thermal conductivity of 0.27 W/(m·K)	ISO 8302
Vicat softening temperature		155 °C Show Supplier Material materials with Vicat softening temperature of 155 °C	ISO 306 \| Rate B/120
Flammability	Glow Wire Ignitability Temperature, 1.0 mm: 775°C IEC 60695-2-13 <br> UL Recognized, 94V-0 Flame Class Rating: ≥1mm UL 94 <br> UL Recognized, 94-5VA Flame Class Rating: ≥2mm UL 94 <br> Glow Wire Flammability Index, 1.0 mm: 960°C IEC 60695-2-12 <br> Glow Wire Flammability Index, 1.5 mm: 960°C IEC 60695-2-12 <br> Glow Wire Ignitability Temperature, 1.5 mm: 775°C IEC 60695-2-13 <br> UL Recognized, 94V-1 Flame Class Rating: ≥0.8mm UL 94 <br> UV-light, water exposure/immersion: F1- UL 746C <br> UL Yellow Card Link: https://iq.ul.com/ul/cert.aspx?ULID=100727518- - <br> UL Yellow Card Link 2: https://iq.ul.com/ul/cert.aspx?ULID=100727519- -

Electrical

Property	Temperature	Value	Comment
Comparative tracking index	23.0 °C	2 V Show Supplier Material materials with Comparative tracking index of 2 V	UL 746A \| (UL) {PLC}
Dielectric constant, 1MHz	23.0 °C	2.7 [-] Show Supplier Material materials with Dielectric constant, 1MHz of 2.7 [-]	IEC 60250
Dielectric constant, 60Hz	23.0 °C	2.8 [-] Show Supplier Material materials with Dielectric constant, 60Hz of 2.8 [-]	IEC 60250 \| 50/60 Hz
Dielectric strength	23.0 °C	16 kV/mm Show Supplier Material materials with Dielectric strength of 16 kV/mm	IEC 60243-1 \| in oil, 3.2 mm,
Dissipation factor, 1MHz	23.0 °C	3E-3 [-] Show Supplier Material materials with Dissipation factor, 1MHz of 3E-3 [-]	IEC 60250
Dissipation factor, 50Hz	23.0 °C	9E-4 [-] Show Supplier Material materials with Dissipation factor, 50Hz of 9E-4 [-]	IEC 60250 \| 50/60 Hz
High Amp Arc Ignition	23.0 °C	0.8 mm Show Supplier Material materials with High Amp Arc Ignition of 0.8 mm	≥, UL 746A \| PLC 0
High Volt Arc Track Rate	23.0 °C	4 PLC Code Show Supplier Material materials with High Volt Arc Track Rate of 4 PLC Code	UL 746A \| (PLC)
Hot-Wire Ignition	23.0 °C	0.8 mm Show Supplier Material materials with Hot-Wire Ignition of 0.8 mm	≥, UL 746A \| PLC 0
Sheet resistivity, ROA	23.0 °C	1.00E+15 Ω Show Supplier Material materials with Sheet resistivity, ROA of 1.00E+15 Ω	>, IEC 60093
Volume resistivity	23.0 °C	1.00E+15 Ω·cm Show Supplier Material materials with Volume resistivity of 1.00E+15 Ω·cm	IEC 60093 \|

Rheological Properties

Property	Temperature	Value	Comment
Melt mass-flow rate		3.5 g/10min Show Supplier Material materials with Melt mass-flow rate of 3.5 g/10min	ASTM D 1238 \| 280°C/5.0 kgf
Melt volume-flow rate		10 cm³/10min Show Supplier Material materials with Melt volume-flow rate of 10 cm³/10min	ISO 1133 \| MVR at 300°C/5.0 kg
Shrinkage	23.0 °C	0.5 % Show Supplier Material materials with Shrinkage of 0.5 %	SABIC method \| 3.2 mm

Technological properties

Property
Application areas	Pump, Photovoltaic Components, Plumbing, Non-LED Lighting, Personal Computing, Infrastructure, Medical Device, LED Lighting, Washing Machine, Wiring Devices, Wireless Communications, Coffee Maker/Espresso Machine, Document Handling, Dishwasher, Circuit Protection, Amusement Machine, Enclosure/Housing/Cover, Electronics, Energy Management, Enclosures, Electronic Components
Availability	Europe,Asia,Americas
Processing methods	Hopper Temperature: 80 to 100.0°C Mold Temperature: 100 to 130.0°C Drying Temperature: 110 to 120.0°C Drying Time: 2 to 3.0hrs Front - Zone 3 Temperature: 300 to 320.0°C Rear - Zone 1 Temperature: 260 to 280.0°C Melt Temperature: 300 to 320.0°C Nozzle Temperature: 280 to 300.0°C Middle - Zone 2 Temperature: 280 to 300.0°C
Supplier Disclaimer	While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.