NORYL™ Resin FP5140 - Europe

Want to keep this datasheet? Save it now in your required format

Description

NORYL™ FP5140 resin is a non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS). This injection moldable grade contains non-brominated, non-chlorinated flame retardant with a UL94 flame rating of V1 at 1.5mm NORYL FP5140 resin was designed to have very good dimensional stability with high flow and exhibits good rheological properties, high heat resistance, hydrolysis resistance, and very low density. The combination of these properties makes this material an excellent candidate for Flat Panel TV enclosure applications.

This material data has been provided by Sabic.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Available suppliers

SABIC

MANUFACTURER, PROCESSOR AND DISTRIBUTOR

Additional services:

Our six Global Application Technology development hubs add value to our customers’ entire product development cycles in a wide range of industries. We provide our customers with advanced design, predictive engineering, testing, validation and processing services. Our COLORXPRESS™ services team provides global color matching and maintenance. Our Fast Formulation services provide initial assessments within five business days and custom-made samples typically in four to six weeks.

Applications

Electronics

Display Devices

Materials by this supplier

LNP™ THERMOCOMP™ Compound WF006H

LNP™ THERMOCOMP™ Compound PF00C - Europe

LNP™ THERMOCOMP™ Compound JF006E - Europe

LEXAN™ Copolymer FXE1414T - Americas

LNP™ ELCRES™ CRX9411

See all materials by this supplier

Properties

General

Property	Temperature	Value	Comment
Density	23.0 °C	1.11 g/cm³ Show Supplier Material materials with Density of 1.11 g/cm³	ISO 1183
Limiting oxygen index	23.0 °C	30 % Show Supplier Material materials with Limiting oxygen index of 30 %
Moisture absorption	23.0 °C	0.05 % Show Supplier Material materials with Moisture absorption of 0.05 %	ISO 62 \| (23°C / 50% RH)
Relative density	23.0 °C	1.11 [-] Show Supplier Material materials with Relative density of 1.11 [-]	ASTM D 792
Water absorption	23.0 °C	0.18 % Show Supplier Material materials with Water absorption of 0.18 %	ISO 62-1 \| (23°C/saturated)

Mechanical

Property	Temperature	Value	Comment
Elastic modulus	23.0 °C	2.5 GPa Show Supplier Material materials with Elastic modulus of 2.5 GPa	ISO 527 \| 1 mm/min
Elongation	23.0 °C	3.5 % Show Supplier Material materials with Elongation of 3.5 %	ISO 527 \| yield, 50 mm/min
Flexural modulus	23.0 °C	2.3 GPa Show Supplier Material materials with Flexural modulus of 2.3 GPa	ISO 178 \| 2 mm/min
Flexural strength	23.0 °C	87 MPa Show Supplier Material materials with Flexural strength of 87 MPa	ISO 178 \| yield, 2 mm/min
Impact strength, Charpy notched	23.0 °C	5 kJ/m² Show Supplier Material materials with Impact strength, Charpy notched of 5 kJ/m²	ISO 179/1eA \| V-notch Edgew 80104 sp=62mm, 23°C
Impact strength, Izod notched	23.0 °C	4 kJ/m² Show Supplier Material materials with Impact strength, Izod notched of 4 kJ/m²	ISO 180/1A \| 80104, -30°C
Tensile strength	23.0 °C	48 MPa Show Supplier Material materials with Tensile strength of 48 MPa	ISO 527 \| break, 50 mm/min

Thermal

Property	Temperature	Value	Comment
Coefficient of thermal expansion	23.0 °C	8.3E-5 1/K Show Supplier Material materials with Coefficient of thermal expansion of 8.3E-5 1/K	ISO 11359-2 \| -40°C to 40°C
Coefficient of thermal expansion, transverse	23.0 °C	7.7E-5 1/K Show Supplier Material materials with Coefficient of thermal expansion, transverse of 7.7E-5 1/K	ISO 11359-2 \| -40°C to 40°C
Glow Wire Ignition Temperature		725 °C Show Supplier Material materials with Glow Wire Ignition Temperature of 725 °C	IEC 60695-2-13 \| 3.0 mm
Heat deflection temperature		85 °C Show Supplier Material materials with Heat deflection temperature of 85 °C
Heat deflection temperature, 1.80 MPa		85 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 85 °C	ISO 75/Af \| Flatw 80104 sp=64mm
Relative temperature index, electrical		65 °C Show Supplier Material materials with Relative temperature index, electrical of 65 °C	UL 746B
Relative temperature index, mechanical impact		65 °C Show Supplier Material materials with Relative temperature index, mechanical impact of 65 °C	UL 746B
Relative temperature index, mechanical strength		65 °C Show Supplier Material materials with Relative temperature index, mechanical strength of 65 °C	UL 746B
Vicat softening temperature		110 °C Show Supplier Material materials with Vicat softening temperature of 110 °C	ISO 306 \| Rate B/120
Flammability	Glow Wire Flammability Index 960°C, passes at: 3mm IEC 60695-2-12 <br> Glow Wire Flammability Index 960°C, passes at: 3mm IEC 60695-2-12 <br> UL Recognized, 94V-0 Flame Class Rating: ≥2mm UL 94 <br> UL Recognized, 94V-1 Flame Class Rating: ≥1.5mm UL 94 <br> UL Recognized, 94V-2 Flame Class Rating: ≥1mm UL 94 <br> UL Recognized, 94V-2 Flame Class Rating: ≥1mm UL 94 <br> UL Yellow Card Link: https://iq.ul.com/ul/cert.aspx?ULID=644141- - <br> Glow Wire Ignitability Temperature, 1.0 mm: 700°C IEC 60695-2-13

Electrical

Property	Temperature	Value	Comment
Comparative tracking index	23.0 °C	250 V Show Supplier Material materials with Comparative tracking index of 250 V	IEC 60112 \|
Dielectric constant, 1MHz	23.0 °C	2.8 [-] Show Supplier Material materials with Dielectric constant, 1MHz of 2.8 [-]	IEC 60250
Dielectric strength	23.0 °C	27.5 kV/mm Show Supplier Material materials with Dielectric strength of 27.5 kV/mm	IEC 60243-1 \| in oil, 1.6 mm
Dissipation factor, 1MHz	23.0 °C	2E-3 [-] Show Supplier Material materials with Dissipation factor, 1MHz of 2E-3 [-]	IEC 60250
Sheet resistivity, ROA	23.0 °C	8.00E+16 - 8.50E+16 Ω Show Supplier Material materials with Sheet resistivity, ROA of 8.00E+16 - 8.50E+16 Ω	IEC 60093
Volume resistivity	23.0 °C	3.00E+16 - 3.50E+16 Ω·cm Show Supplier Material materials with Volume resistivity of 3.00E+16 - 3.50E+16 Ω·cm	IEC 60093

Rheological Properties

Property	Temperature	Value	Comment
Melt volume-flow rate		15 cm³/10min Show Supplier Material materials with Melt volume-flow rate of 15 cm³/10min	ISO 1133 \| MVR at 280°C/1.2 kg
Shrinkage	23.0 °C	0.5 % Show Supplier Material materials with Shrinkage of 0.5 %	SABIC method \| 3.2 mm

Technological properties

Property
Application areas	Displays
Availability	Americas
Processing methods	Nozzle Temperature: 240 to 270.0°C Hopper Temperature: 60 to 80.0°C Drying Time: 2 to 3.0hrs Drying Temperature: 70 to 80.0°C Middle - Zone 2 Temperature: 230 to 260.0°C Front - Zone 3 Temperature: 250 to 285.0°C Rear - Zone 1 Temperature: 200 to 220.0°C Mold Temperature: 40 to 65.0°C Melt Temperature: 250 to 285.0°C
Supplier Disclaimer	While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.