General
Property | Temperature | Value | Comment |
---|---|---|---|
Density | 23.0 °C | 1.35 g/cm³ Show Supplier Material materials with Density of 1.35 g/cm³ | ISO 1183 |
Water absorption | 23.0 °C | 4.8 % Show Supplier Material materials with Water absorption of 4.8 % | ISO 62-1 | (23°C/24hrs) |
Mechanical
Property | Temperature | Value | Comment | ||
---|---|---|---|---|---|
Elastic modulus | 23.0 °C | 1.6 GPa Show Supplier Material materials with Elastic modulus of 1.6 GPa | ISO 527 | 1 mm/min | ||
Elongation | 23.0 °C | 15.8 % Show Supplier Material materials with Elongation of 15.8 % | ISO 527 | yield, 5 mm/min | ||
Flexural modulus | 23.0 °C | 1.6 GPa Show Supplier Material materials with Flexural modulus of 1.6 GPa | ISO 178 | 2 mm/min | ||
Flexural strength | 23.0 °C | 52 MPa Show Supplier Material materials with Flexural strength of 52 MPa | ISO 178 | yield, 2 mm/min | ||
Impact strength, Izod notched | 23.0 °C | 14 kJ/m² Show Supplier Material materials with Impact strength, Izod notched of 14 kJ/m² | ISO 180/1A | notched 80*10*4, 23°C | ||
Tensile strength | 23.0 °C | 43 MPa Show Supplier Material materials with Tensile strength of 43 MPa | ISO 527 | yield, 5 mm/min | ||
Impact strength, Izod unnotched | ISO 180/1U | unnotched 80*10*4 |
Thermal
Property | Value | Comment |
---|---|---|
Heat deflection temperature | 64 - 136 °C Show Supplier Material materials with Heat deflection temperature of 64 - 136 °C | |
Heat deflection temperature, 0.45 MPa | 136 °C Show Supplier Material materials with Heat deflection temperature, 0.45 MPa of 136 °C | ISO 75/Bf | Flatw 80*10*4 sp=64mm |
Heat deflection temperature, 1.80 MPa | 64 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 64 °C | ISO 75/Af | Flatw 80*10*4 sp=64mm |
Electrical
Property | Temperature | Value | Comment |
---|---|---|---|
Sheet resistivity, ROA | 23.0 °C | 1.00E+10 - 1.00E+12 Ω Show Supplier Material materials with Sheet resistivity, ROA of 1.00E+10 - 1.00E+12 Ω | ASTM D 257 |
Volume resistivity | 23.0 °C | 1.00E+10 - 1.00E+12 Ω·cm Show Supplier Material materials with Volume resistivity of 1.00E+10 - 1.00E+12 Ω·cm | ASTM D 257 |
Rheological Properties
Property | Temperature | Value | Comment |
---|---|---|---|
Shrinkage | 23.0 °C | 2.8 % Show Supplier Material materials with Shrinkage of 2.8 % | SABIC method |
Technological properties
Property | ||
---|---|---|
Application areas | Building/Construction Sheet, HVAC Underhood, Electronics | |
Availability | Europe,Asia,Americas | |
Processing methods | Drying Temperature: 80°C | |
Supplier Disclaimer | While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right. |