General
Property | Temperature | Value | Comment |
---|---|---|---|
Density | 23.0 °C | 1.38 g/cm³ Show Supplier Material materials with Density of 1.38 g/cm³ | ASTM D 792 |
Moisture absorption | 23.0 °C | 0.46 % Show Supplier Material materials with Moisture absorption of 0.46 % | ISO 62 | (23°C / 50% RH) |
Mechanical
Property | Temperature | Value | Comment |
---|---|---|---|
Elastic modulus | 23.0 °C | 35.5 GPa Show Supplier Material materials with Elastic modulus of 35.5 GPa | ISO 527 | 1 mm/min |
Elongation | 23.0 °C | 1.3 % Show Supplier Material materials with Elongation of 1.3 % | ISO 527 | break |
Flexural modulus | 23.0 °C | 26.6 GPa Show Supplier Material materials with Flexural modulus of 26.6 GPa | ISO 178 |
Flexural strength | 23.0 °C | 425 MPa Show Supplier Material materials with Flexural strength of 425 MPa | ISO 178 |
Impact strength, Izod notched | 23.0 °C | 7 kJ/m² Show Supplier Material materials with Impact strength, Izod notched of 7 kJ/m² | ISO 180/1A | notched 80*10*4, 23°C |
Impact strength, Izod notched, ASTM | 23.0 °C | 58 J/m Show Supplier Material materials with Impact strength, Izod notched, ASTM of 58 J/m | ASTM D 256 |
Impact strength, Izod unnotched | 23.0 °C | 45 kJ/m² Show Supplier Material materials with Impact strength, Izod unnotched of 45 kJ/m² | ISO 180/1U | 80*10*4, 23°C |
Impact strength, Izod unnotched, ASTM | 23.0 °C | 328 J/m Show Supplier Material materials with Impact strength, Izod unnotched, ASTM of 328 J/m | ASTM D 4812 | 23°C |
Instrumented Impact, at Peak | 23.0 °C | 7 J Show Supplier Material materials with Instrumented Impact, at Peak of 7 J | ASTM D 3763 | 23°C |
Tensile strength | 23.0 °C | 232 MPa Show Supplier Material materials with Tensile strength of 232 MPa | ISO 527 | break |
Electrical
Property | Temperature | Value | Comment |
---|---|---|---|
Sheet resistivity, ROA | 23.0 °C | 100 - 10000 Ω Show Supplier Material materials with Sheet resistivity, ROA of 100 - 10000 Ω | ASTM D 257 |
Volume resistivity | 23.0 °C | 100 - 10000 Ω·cm Show Supplier Material materials with Volume resistivity of 100 - 10000 Ω·cm | ASTM D 257 |
Rheological Properties
Technological properties
Property | ||
---|---|---|
Application areas | Enclosures | |
Availability | Europe,Asia,Americas | |
Processing methods | Drying Temperature: 120 to 150.0°C | |
Supplier Disclaimer | While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right. |