General
Property | Temperature | Value | Comment |
---|---|---|---|
Density | 23.0 °C | 1.28 g/cm³ Show Supplier Material materials with Density of 1.28 g/cm³ | ISO 1183 |
Mechanical
Property | Temperature | Value | Comment |
---|---|---|---|
Flexural modulus | 23.0 °C | 3.6 GPa Show Supplier Material materials with Flexural modulus of 3.6 GPa | ISO 178 |
Impact strength, Izod notched | 23.0 °C | 4 kJ/m² Show Supplier Material materials with Impact strength, Izod notched of 4 kJ/m² | ISO 180/1A | notched 80*10*4, 23°C |
Tensile strength | 23.0 °C | 43 MPa Show Supplier Material materials with Tensile strength of 43 MPa | ISO 527 | yield, 5 mm/min |
Thermal
Property | Value | Comment |
---|---|---|
Heat deflection temperature | 112 - 228 °C Show Supplier Material materials with Heat deflection temperature of 112 - 228 °C | |
Heat deflection temperature, 0.45 MPa | 228 °C Show Supplier Material materials with Heat deflection temperature, 0.45 MPa of 228 °C | ISO 75/Bf | Flatw 80*10*4 sp=64mm |
Heat deflection temperature, 1.80 MPa | 112 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 112 °C | ISO 75/Af | Flatw 80*10*4 sp=64mm |
Technological properties
Property | ||
---|---|---|
Application areas | Electronic Components, Engine Component, Dishwasher | |
Availability | Europe,Asia,Americas | |
Supplier Disclaimer | While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right. |