General
Property | Temperature | Value | Comment |
---|---|---|---|
Relative density | 23.0 °C | 1.1 [-] Show Supplier Material materials with Relative density of 1.1 [-] | ASTM D 792 |
Mechanical
Property | Temperature | Value | Comment |
---|---|---|---|
Elongation | 23.0 °C | 51 % Show Supplier Material materials with Elongation of 51 % | ISO 527 | break, 50 mm/min |
Flexural modulus | 23.0 °C | 2.4 GPa Show Supplier Material materials with Flexural modulus of 2.4 GPa | ISO 178 | 2 mm/min |
Flexural strength | 23.0 °C | 98 MPa Show Supplier Material materials with Flexural strength of 98 MPa | ISO 178 | break, 2 mm/min |
Impact strength, Izod notched | 23.0 °C | 8 kJ/m² Show Supplier Material materials with Impact strength, Izod notched of 8 kJ/m² | ISO 180/4A | notched 63.5*12.7*3.2, -30°C |
Impact strength, Izod notched, ASTM | 23.0 °C | 100 J/m Show Supplier Material materials with Impact strength, Izod notched, ASTM of 100 J/m | ASTM D 256 | notched, -30°C |
Tensile strength | 23.0 °C | 66 MPa Show Supplier Material materials with Tensile strength of 66 MPa | ISO 527 | yield, 50 mm/min |
Thermal
Property | Temperature | Value | Comment |
---|---|---|---|
Coefficient of thermal expansion | 23.0 °C | 1.67E-4 1/K Show Supplier Material materials with Coefficient of thermal expansion of 1.67E-4 1/K | ASTM E 831 | 60°C to 138°C |
Coefficient of thermal expansion, transverse | 23.0 °C | 8.5E-5 1/K Show Supplier Material materials with Coefficient of thermal expansion, transverse of 8.5E-5 1/K | ASTM E 831 | -40°C to 40°C |
Heat deflection temperature | 181 °C Show Supplier Material materials with Heat deflection temperature of 181 °C | ||
Heat deflection temperature, 0.45 MPa | 181 °C Show Supplier Material materials with Heat deflection temperature, 0.45 MPa of 181 °C | ISO 75/Be | Edgew 120*10*4 sp=100mm |
Electrical
Property | Temperature | Value | Comment |
---|---|---|---|
Dielectric strength | 23.0 °C | 22.4 kV/mm Show Supplier Material materials with Dielectric strength of 22.4 kV/mm | ASTM D 149 | in oil, 1.6 mm |
Dissipation factor, 1MHz | 23.0 °C | 0.02 [-] Show Supplier Material materials with Dissipation factor, 1MHz of 0.02 [-] | ASTM D 150 |
Rheological Properties
Property | Value | Comment |
---|---|---|
Melt mass-flow rate | 65 g/10min Show Supplier Material materials with Melt mass-flow rate of 65 g/10min | ASTM D 1238 | 280°C/5.0 kgf |
Technological properties
Property | ||
---|---|---|
Application areas | Auto Electrical, Circuit Protection, Auto Aftermarket, Electronic Components, Recreational Vehicle | |
Availability | Europe,Asia,Americas | |
Processing methods | Melt Temperature: 280 to 310.0°C | |
Supplier Disclaimer | While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right. |