Properties
General
| Property | Value | Temperature | Comment |
|---|---|---|---|
Density | 1.34 g/cm³ Show Supplier Material materials with Density of 1.34 g/cm³ at 23.0 °C | 23.0 °C | ASTM D 792 |
Mechanical
| Property | Value | Temperature | Comment |
|---|---|---|---|
Elastic modulus | 6.48 GPa Show Supplier Material materials with Elastic modulus of 6.48 GPa at 23.0 °C | 23.0 °C | ASTM D 638 | 50 mm/min |
Elongation | 3.1 % Show Supplier Material materials with Elongation of 3.1 % at 23.0 °C | 23.0 °C | ASTM D 638 | break |
Flexural modulus | 6.2 GPa Show Supplier Material materials with Flexural modulus of 6.2 GPa at 23.0 °C | 23.0 °C | ASTM D 790 |
Flexural strength | 172 MPa Show Supplier Material materials with Flexural strength of 172 MPa at 23.0 °C | 23.0 °C | ASTM D 790 |
Impact strength, Izod notched | 128 kJ/m² Show Supplier Material materials with Impact strength, Izod notched of 128 kJ/m² at 23.0 °C | 23.0 °C | ASTM D 256 | notched, 23°C |
Impact strength, Izod notched, ASTM | 128 J/m Show Supplier Material materials with Impact strength, Izod notched, ASTM of 128 J/m at 23.0 °C | 23.0 °C | ASTM D 256 |
Impact strength, Izod unnotched, ASTM | 896 J/m Show Supplier Material materials with Impact strength, Izod unnotched, ASTM of 896 J/m at 23.0 °C | 23.0 °C | ASTM D 4812 | 23°C |
Tensile strength | 111 MPa Show Supplier Material materials with Tensile strength of 111 MPa at 23.0 °C | 23.0 °C | ASTM D 638 | break |
Thermal
| Property | Value | Comment |
|---|---|---|
Heat deflection temperature, 1.80 MPa | 139 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 139 °C | ASTM D 648 | 3.2mm, unannealed |
Rheological Properties
| Property | Value | Temperature | Comment |
|---|---|---|---|
Shrinkage | 0.4 % Show Supplier Material materials with Shrinkage of 0.4 % at 23.0 °C | 23.0 °C | ASTM D 955 | 24 hrs |
Technological properties
| Property | ||
|---|---|---|
| Application areas | Surgical Devices, Medical Device | |
| Availability | Europe,Asia,Americas | |
| Features | High Stiffness, Structural | |
| Processing methods | Drying Temperature: 120 °C | Drying Time: 4 hrs | Maximum Moisture Content: 0.02 % | Melt Temperature: 305 to 325.0 °C | Front - Zone 3 Temperature: 320 to 330.0 °C | Middle - Zone 2 Temperature: 310 to 320.0 °C | Rear - Zone 1 Temperature: 295 to 305.0 °C | Mold Temperature: 80 to 110.0 °C | Back Pressure: 0.2 to 0.3 MPa | Screw Speed: 30 to 60.0 rpm | |
| Supplier Disclaimer | While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right. | |