NORYL™ Resin EN95 - Asia

Want to keep this datasheet? Save it now in your required format

Description

NORYL™ EN95 resin is a non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS). This low heat extrusion grade exhibits low moisture absorption, creep resistance, dimensional stability, and hydrolytic stability.

This material data has been provided by Sabic.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

All categories

Available suppliers

SABIC

MANUFACTURER, PROCESSOR AND DISTRIBUTOR

Additional services:

Our six Global Application Technology development hubs add value to our customers’ entire product development cycles in a wide range of industries. We provide our customers with advanced design, predictive engineering, testing, validation and processing services. Our COLORXPRESS™ services team provides global color matching and maintenance. Our Fast Formulation services provide initial assessments within five business days and custom-made samples typically in four to six weeks.

Materials by this supplier

LNP™ THERMOCOMP™ Compound WF006H

LNP™ THERMOCOMP™ Compound PF00C - Europe

LNP™ THERMOCOMP™ Compound JF006E - Europe

LEXAN™ Copolymer FXE1414T - Americas

LNP™ ELCRES™ CRX9411

See all materials by this supplier

Properties

General

Property	Temperature	Value	Comment
Relative density	23.0 °C	1.06 [-] Show Supplier Material materials with Relative density of 1.06 [-]	ASTM D 792 \|

Mechanical

Property	Temperature	Value	Comment
Elongation	23.0 °C	50 % Show Supplier Material materials with Elongation of 50 %	ASTM D 638 \| brk, Type I, 50 mm/min
Flexural modulus	23.0 °C	2.3 GPa Show Supplier Material materials with Flexural modulus of 2.3 GPa	ASTM D 790 \| 1.3 mm/min, 50 mm span
Flexural strength	23.0 °C	75 MPa Show Supplier Material materials with Flexural strength of 75 MPa	ASTM D 790 \| yld, 1.3 mm/min, 50 mm span
Impact strength, Izod notched	23.0 °C	277 kJ/m² Show Supplier Material materials with Impact strength, Izod notched of 277 kJ/m²	ASTM D 256 \| notched, 23°C
Impact strength, Izod notched, ASTM	23.0 °C	277 J/m Show Supplier Material materials with Impact strength, Izod notched, ASTM of 277 J/m	ASTM D 256 \| notched, 23°C
Tensile strength	23.0 °C	45 MPa Show Supplier Material materials with Tensile strength of 45 MPa	ASTM D 638 \| yld, Type I, 50 mm/min

Thermal

Property	Value	Comment
Heat deflection temperature	100 °C Show Supplier Material materials with Heat deflection temperature of 100 °C
Heat deflection temperature, 1.80 MPa	100 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 100 °C	ASTM D 648 \| 3.2mm, unannealed

Rheological Properties

Property	Temperature	Value	Comment
Shrinkage	23.0 °C	0.5 % Show Supplier Material materials with Shrinkage of 0.5 %	SABIC method \| 3.2 mm

Technological properties

Property
Availability	Asia
Processing methods	Drying Time (Cumulative): 8hrs Melt Temperature: 210 to 230.0°C Drying Temperature: 100 to 105.0°C Drying Time: 2 to 4.0hrs
Supplier Disclaimer	While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.