NORYL™ Resin PX5373 - Asia

Want to keep this datasheet? Save it now in your required format

Description

NORYL™ PX5373 resin is a 20% glass reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS). This injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of 5VA at 2mm and V1 at 1.5mm along with UL746C Outdoor Suitability rating of F1 and RTI of 110C. NORYL SE1GFN2 exhibits high heat resistance, good dielectric strength, dimensional stability, hydrolytic stability, and very low moisture absorption. This material is an excellent candidate for a variety of applications such as solar frames, unattended power supply (UPS) inverter/charger, indoor and outdoor electrical enclosures / housings / connectors, and wall plates / sockets / switches.

This material data has been provided by Sabic.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

All categories

Available suppliers

SABIC

MANUFACTURER, PROCESSOR AND DISTRIBUTOR

Additional services:

Our six Global Application Technology development hubs add value to our customers’ entire product development cycles in a wide range of industries. We provide our customers with advanced design, predictive engineering, testing, validation and processing services. Our COLORXPRESS™ services team provides global color matching and maintenance. Our Fast Formulation services provide initial assessments within five business days and custom-made samples typically in four to six weeks.

Materials by this supplier

LNP™ THERMOCOMP™ Compound WF006H

LNP™ THERMOCOMP™ Compound PF00C - Europe

LNP™ THERMOCOMP™ Compound JF006E - Europe

LEXAN™ Copolymer FXE1414T - Americas

LNP™ ELCRES™ CRX9411

See all materials by this supplier

Properties

General

Property	Temperature	Value	Comment
Limiting oxygen index	23.0 °C	27 % Show Supplier Material materials with Limiting oxygen index of 27 %
Relative density	23.0 °C	1.23 [-] Show Supplier Material materials with Relative density of 1.23 [-]	ASTM D 792 \|
Water absorption	23.0 °C	0.06 % Show Supplier Material materials with Water absorption of 0.06 %	ASTM D 570 \| (23°C/24hrs)

Mechanical

Property	Temperature	Value	Comment
Elongation	23.0 °C	5 % Show Supplier Material materials with Elongation of 5 %	ASTM D 638 \| brk, Type I, 5 mm/min
Flexural modulus	23.0 °C	5.7 GPa Show Supplier Material materials with Flexural modulus of 5.7 GPa	ASTM D 790 \| 2.6 mm/min, 100 mm span
Flexural strength	23.0 °C	151 MPa Show Supplier Material materials with Flexural strength of 151 MPa	ASTM D 790 \| yld, 2.6 mm/min, 100 mm span
Tensile strength	23.0 °C	106 MPa Show Supplier Material materials with Tensile strength of 106 MPa	ASTM D 638 \| brk, Type I, 5 mm/min

Thermal

Property	Temperature	Value	Comment
Coefficient of thermal expansion	23.0 °C	3.6E-5 1/K Show Supplier Material materials with Coefficient of thermal expansion of 3.6E-5 1/K	ASTM E 831 \| -40°C to 95°C
Heat deflection temperature		132 - 137 °C Show Supplier Material materials with Heat deflection temperature of 132 - 137 °C
Heat deflection temperature, 0.45 MPa		137 °C Show Supplier Material materials with Heat deflection temperature, 0.45 MPa of 137 °C	ASTM D 648 \| 6.4 mm, unannealed
Heat deflection temperature, 1.80 MPa		132 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 132 °C	ASTM D 648 \| 6.4 mm, unannealed
Relative temperature index, electrical		110 °C Show Supplier Material materials with Relative temperature index, electrical of 110 °C	UL 746B
Relative temperature index, mechanical impact		105 °C Show Supplier Material materials with Relative temperature index, mechanical impact of 105 °C	UL 746B
Relative temperature index, mechanical strength		110 °C Show Supplier Material materials with Relative temperature index, mechanical strength of 110 °C	UL 746B
Flammability	UL Recognized, 94V-0 Flame Class Rating: 5.99mm UL 94 <br> UL Recognized, 94V-1 Flame Class Rating: 1.47mm UL 94

Electrical

Property	Temperature	Value	Comment
Comparative tracking index	23.0 °C	1 V Show Supplier Material materials with Comparative tracking index of 1 V	UL 746A \| (UL) {PLC}
Dielectric constant, 60Hz	23.0 °C	2.98 [-] Show Supplier Material materials with Dielectric constant, 60Hz of 2.98 [-]	ASTM D 150 \| 50/60 Hz
Dielectric strength	23.0 °C	23.6 kV/mm Show Supplier Material materials with Dielectric strength of 23.6 kV/mm	ASTM D 149 \| in oil, 3.2 mm
Dissipation factor, 50Hz	23.0 °C	1.6E-3 [-] Show Supplier Material materials with Dissipation factor, 50Hz of 1.6E-3 [-]	ASTM D 150 \| 50/60 Hz
High Amp Arc Ignition	23.0 °C	1 mm Show Supplier Material materials with High Amp Arc Ignition of 1 mm	UL 746A \| surface {PLC}
High Volt Arc Track Rate	23.0 °C	4 PLC Code Show Supplier Material materials with High Volt Arc Track Rate of 4 PLC Code	UL 746A \| (PLC)
Hot-Wire Ignition	23.0 °C	0 mm Show Supplier Material materials with Hot-Wire Ignition of 0 mm	UL 746A \| (PLC)

Rheological Properties

Property	Temperature	Value	Comment
Shrinkage	23.0 °C	0.2 % Show Supplier Material materials with Shrinkage of 0.2 %	SABIC method \| 3.2 mm

Technological properties

Property
Application areas	Enclosure/Housing/Cover, Energy Management, Electronics, Enclosures, Electronic Components, EV Infrastructure, Electronic Material Handling, EV/HEV Battery, Fixture Bath/Shower, Industrial Material Handling, Individual Equiptment, Hygiene/Personal Care, HVAC Underhood, Lab Ware and Clinical Diagnostics, Hot Water System, Humidity Control, Heavy Vehicles, Cluster, Coffee Maker/Espresso Machine, Battery System, Building Element, Data Transfer, Document Handling, Displays, Dishwasher, Defense Vehicles, Drain Pan, Air Conditioning, Battery Pack, Building Accessory, Circuit Protection, Audio, Auto Aftermarket, ATM/Ticket Machine, Security/Detection, Respiratory, Sensor, Surgical Devices, Pump, Pipe/Fitting, Power Manangement, Plumbing, Photovoltaic Components, Ignition System, Meter Gas, Microwave Oven, Personal Computing, Non-LED Lighting, Motorcycle, Wearables, Water Treatment/Filtration, Wiring Devices, Wireless Communications, Washing Machine, Travel Suitcase, Swimming Pool/Spa, Traffic Management
Availability	Europe,Asia,Americas
Processing methods	Drying Temperature: 110 to 120.0°C Nozzle Temperature: 300 to 325.0°C Mold Temperature: 80 to 110.0°C Rear - Zone 1 Temperature: 265 to 315.0°C Melt Temperature: 300 to 325.0°C Back Pressure: 0.3 to 0.7MPa Maximum Moisture Content: 0.02% Drying Time: 3 to 4.0hrs Screw Speed: 20 to 100.0rpm Front - Zone 3 Temperature: 290 to 325.0°C Shot to Cylinder Size: 30 to 70.0% Middle - Zone 2 Temperature: 275 to 320.0°C Drying Time (Cumulative): 8hrs
Supplier Disclaimer	While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.

NORYL™ Resin PX5373 - Asia

Description

Ashby charts

Applications

Materials by this supplier

Properties