LNP™ STAT-KON™ Compound UC1200

Want to keep this datasheet? Save it now in your required format

Description

LNP™ STAT-KON™ UC1200 is a 12% carbon fiber reinforced PEI. High modulus with ESD characteristics for high-heat applications.

This material data has been provided by Sabic.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

Properties

General

PropertyTemperatureValueComment

Relative density

23.0 °C

1.32 [-]

Show Supplier Material materials with Relative density of 1.32 [-]

ASTM D 792 |

Mechanical

PropertyTemperatureValueComment

Elastic modulus

23.0 °C

8.1 GPa

Show Supplier Material materials with Elastic modulus of 8.1 GPa

ASTM D 638 | 5 mm/min

Elongation

23.0 °C

5.1 %

Show Supplier Material materials with Elongation of 5.1 %

ASTM D 638 | brk, Type I, 5 mm/min

Flexural modulus

23.0 °C

8.3 GPa

Show Supplier Material materials with Flexural modulus of 8.3 GPa

ASTM D 790 | 2.6 mm/min, 100 mm span

Flexural strength

23.0 °C

193 MPa

Show Supplier Material materials with Flexural strength of 193 MPa

ASTM D 790 | brk, 2.6 mm/min, 100 mm span

Impact strength, Izod notched

23.0 °C

37 kJ/m²

Show Supplier Material materials with Impact strength, Izod notched of 37 kJ/m²

ASTM D 256 | notched, 23°C

Impact strength, Izod notched, ASTM

23.0 °C

37 J/m

Show Supplier Material materials with Impact strength, Izod notched, ASTM of 37 J/m

ASTM D 256 | notched, 23°C

Impact strength, Izod unnotched, ASTM

23.0 °C

416 J/m

Show Supplier Material materials with Impact strength, Izod unnotched, ASTM of 416 J/m

ASTM D 4812 | 23°C

Instrumented Impact, Total Energy

23.0 °C

6 J

Show Supplier Material materials with Instrumented Impact, Total Energy of 6 J

ASTM D 3763 | 23°C

Tensile strength

23.0 °C

131 MPa

Show Supplier Material materials with Tensile strength of 131 MPa

ASTM D 638 | brk, Type I, 5 mm/min

Thermal

PropertyTemperatureValueComment

Coefficient of thermal expansion

23.0 °C

1.44E-5 1/K

Show Supplier Material materials with Coefficient of thermal expansion of 1.44E-5 1/K

ASTM E 831 | -40°C to 40°C

Coefficient of thermal expansion, transverse

23.0 °C

3.96E-5 1/K

Show Supplier Material materials with Coefficient of thermal expansion, transverse of 3.96E-5 1/K

ASTM E 831 | -20°C to 150°C

Heat deflection temperature

208 - 213 °C

Show Supplier Material materials with Heat deflection temperature of 208 - 213 °C

Heat deflection temperature, 0.45 MPa

213 °C

Show Supplier Material materials with Heat deflection temperature, 0.45 MPa of 213 °C

ASTM D 648 | 3.2 mm, unannealed

Heat deflection temperature, 1.80 MPa

208 °C

Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 208 °C

ASTM D 648 | 3.2mm, unannealed

Relative temperature index, electrical

105 °C

Show Supplier Material materials with Relative temperature index, electrical of 105 °C

UL 746B

Relative temperature index, mechanical impact

105 °C

Show Supplier Material materials with Relative temperature index, mechanical impact of 105 °C

UL 746B

Relative temperature index, mechanical strength

105 °C

Show Supplier Material materials with Relative temperature index, mechanical strength of 105 °C

UL 746B

Vicat softening temperature

214 °C

Show Supplier Material materials with Vicat softening temperature of 214 °C

ASTM D 1525 | Rate B/50

Flammability

UL Yellow Card Link: https://iq.ul.com/ul/cert.aspx?ULID=221123- - <br> UL Recognized, 94V-0 Flame Class Rating: ≥1.5mm UL 94

Electrical

PropertyTemperatureValueComment

High Amp Arc Ignition

23.0 °C

1.5 mm

Show Supplier Material materials with High Amp Arc Ignition of 1.5 mm

≥, UL 746A | PLC 2

Hot-Wire Ignition

23.0 °C

3 mm

Show Supplier Material materials with Hot-Wire Ignition of 3 mm

≥, UL 746A | PLC 2

Sheet resistivity, ROA

23.0 °C

200000 Ω

Show Supplier Material materials with Sheet resistivity, ROA of 200000 Ω

ASTM D 257

Volume resistivity

23.0 °C

400 Ω·cm

Show Supplier Material materials with Volume resistivity of 400 Ω·cm

ASTM D 257

Rheological Properties

PropertyTemperatureValueComment

Melt mass-flow rate

7.5 g/10min

Show Supplier Material materials with Melt mass-flow rate of 7.5 g/10min

ASTM D 1238 | 337°C/6.6 kgf

Shrinkage

23.0 °C

0.12 %

Show Supplier Material materials with Shrinkage of 0.12 %

SABIC method | 3.2 mm

Shrinkage, transverse

23.0 °C

0.3 %

Show Supplier Material materials with Shrinkage, transverse of 0.3 %

SABIC method | 3.2 mm

Technological properties

Property
Application areas

Wireless Communications, Commercial Appliance

Availability

Europe,Asia,Americas

Processing methods

Drying Temperature: 150°C
Drying Time: 4 to 6.0hrs
Drying Time (Cumulative): 24hrs
Maximum Moisture Content: 0.02%
Melt Temperature: 380 to 425.0°C
Nozzle Temperature: 375 to 420.0°C
Front - Zone 3 Temperature: 380 to 425.0°C
Middle - Zone 2 Temperature: 370 to 420.0°C
Rear - Zone 1 Temperature: 360 to 405.0°C
Mold Temperature: 135 to 165.0°C
Back Pressure: 0.3 to 0.7MPa
Screw Speed: 40 to 70.0rpm
Shot to Cylinder Size: 40 to 60.0%
Vent Depth: 0.025 to 0.076mm

Supplier Disclaimer

While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.