LNP™ COLORCOMP™ Compound W1000PRB

Want to keep this datasheet? Save it now in your required format

Description

Medium flow, polycarbonate/Polyester alloy; contains mold release. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (ISO 10993 or USP Class VI), food contact compliant. EtO and gamma sterilizable.

This material data has been provided by Sabic.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyValueTemperatureComment

Density

1.31 g/cm³

Show Supplier Material materials with Density of 1.31 g/cm³ at 23.0 °C

23.0 °C

ISO 1183

Moisture absorption

0.08 %

Show Supplier Material materials with Moisture absorption of 0.08 % at 23.0 °C

23.0 °C

ISO 62 | (23°C / 50% RH)

Relative density

1.31 [-]

Show Supplier Material materials with Relative density of 1.31 [-] at 23.0 °C

23.0 °C

ASTM D 792

Water absorption

0.4 %

Show Supplier Material materials with Water absorption of 0.4 % at 23.0 °C

23.0 °C

ISO 62-1 | (23°C/saturated)

Mechanical

PropertyValueTemperatureComment

Elastic modulus

2.6 GPa

Show Supplier Material materials with Elastic modulus of 2.6 GPa at 23.0 °C

23.0 °C

ISO 527 | 1 mm/min

Elongation

10 %

Show Supplier Material materials with Elongation of 10 % at 23.0 °C

23.0 °C

ISO 527 | break, 50 mm/min

Flexural modulus

2.26 GPa

Show Supplier Material materials with Flexural modulus of 2.26 GPa at 23.0 °C

23.0 °C

ISO 178 | 2 mm/min

Flexural strength

80 MPa

Show Supplier Material materials with Flexural strength of 80 MPa at 23.0 °C

23.0 °C

ISO 178 | break, 2 mm/min

Impact strength, Charpy notched

6 kJ/m²

Show Supplier Material materials with Impact strength, Charpy notched of 6 kJ/m² at 23.0 °C

23.0 °C

ISO 179/1eA | V-notch Edgew 80*10*4 sp=62mm, 23°C

Impact strength, Izod notched

2 kJ/m²

Show Supplier Material materials with Impact strength, Izod notched of 2 kJ/m² at 23.0 °C

23.0 °C

ISO 180/1A | notched 80*10*4, 23°C

Impact strength, Izod notched, ASTM

30 J/m

Show Supplier Material materials with Impact strength, Izod notched, ASTM of 30 J/m at 23.0 °C

23.0 °C

ASTM D 256

Instrumented Impact, Total Energy

20 J

Show Supplier Material materials with Instrumented Impact, Total Energy of 20 J at 23.0 °C

23.0 °C

ASTM D 3763 | 23°C

Tensile strength

49 MPa

Show Supplier Material materials with Tensile strength of 49 MPa at 23.0 °C

23.0 °C

ISO 527 | break, 50 mm/min

Thermal

PropertyValueTemperatureComment

Coefficient of thermal expansion

7.6E-5 1/K

Show Supplier Material materials with Coefficient of thermal expansion of 7.6E-5 1/K at 23.0 °C

23.0 °C

ISO 11359-2 | -40°C to 40°C

Coefficient of thermal expansion, transverse

7.8E-5 1/K

Show Supplier Material materials with Coefficient of thermal expansion, transverse of 7.8E-5 1/K at 23.0 °C

23.0 °C

ISO 11359-2 | -40°C to 40°C

Heat deflection temperature, 0.45 MPa

150 °C

Show Supplier Material materials with Heat deflection temperature, 0.45 MPa of 150 °C

ASTM D 648 | 3.2 mm, unannealed

Heat deflection temperature, 1.80 MPa

49 °C

Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 49 °C

ISO 75/Af | Flatw 80*10*4 sp=64mm

Vicat softening temperature

180 °C

Show Supplier Material materials with Vicat softening temperature of 180 °C

ISO 306 | Rate B/120

Rheological Properties

PropertyValueTemperatureComment

Melt mass-flow rate

80 g/10min

Show Supplier Material materials with Melt mass-flow rate of 80 g/10min

ASTM D 1238 | 265°C/2.16kgf

Melt volume-flow rate

70 cm³/10min

Show Supplier Material materials with Melt volume-flow rate of 70 cm³/10min

ISO 1133 | MVR at 265°C/2.16 kg

Shrinkage

1.5 %

Show Supplier Material materials with Shrinkage of 1.5 % at 23.0 °C

23.0 °C

SABIC method | 3.2 mm

Technological properties

Property
Application areas

Wireless Communications, Monitoring and Imaging, Medical Device, Respiratory, Pharmaceutical Packaging & Drug Delivery, Lab Ware and Clinical Diagnostics, Fluid Delivery

Availability

Europe,Asia,Americas

Features

Good Mold Release, Transparent, Care Compliance

Processing methods

Drying Temperature: 120 °C | Drying Time: 3 to 4.0 hrs | Drying Time (Cumulative): 12 hrs | Maximum Moisture Content: 0.02 % | Melt Temperature: 245 to 260.0 °C | Nozzle Temperature: 240 to 255.0 °C | Front - Zone 3 Temperature: 245 to 260.0 °C | Middle - Zone 2 Temperature: 240 to 255.0 °C | Rear - Zone 1 Temperature: 230 to 250.0 °C | Mold Temperature: 50 to 75.0 °C | Back Pressure: 0.3 to 0.7 MPa | Screw Speed: 50 to 100.0 rpm | Shot to Cylinder Size: 40 to 80.0 % | Vent Depth: 0.013 to 0.025 mm | Drying Temperature: 110 to 120.0 °C | Drying Time: 4 to 6.0 hrs | Drying Time (Cumulative): 8 hrs | Melt Temperature: 245 to 260.0 °C | Barrel - Zone 1 Temperature: 200 to 230.0 °C | Barrel - Zone 2 Temperature: 240 to 255.0 °C | Barrel - Zone 3 Temperature: 240 to 275.0 °C | Barrel - Zone 4 Temperature: 240 to 275.0 °C | Adapter Temperature: 240 to 275.0 °C | Die Temperature: 240 to 275.0 °C | Waterbath Temperature: 25 to 35.0 °C

Supplier Disclaimer

While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.