LNP™ COLORCOMP™ Compound GX02708H

Want to keep this datasheet? Save it now in your required format

Description

LNP* COLORCOMP* GX02708H is an unfilled Polysulfone resin. Added feature of this grade is: Healthcare.

This material data has been provided by Sabic.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

All categories

Available suppliers

SABIC

MANUFACTURER, PROCESSOR AND DISTRIBUTOR

Additional services:

Our six Global Application Technology development hubs add value to our customers’ entire product development cycles in a wide range of industries. We provide our customers with advanced design, predictive engineering, testing, validation and processing services. Our COLORXPRESS™ services team provides global color matching and maintenance. Our Fast Formulation services provide initial assessments within five business days and custom-made samples typically in four to six weeks.

Applications

Healthcare

Medical Equipment

Medical Equipment General

Materials by this supplier

LNP™ THERMOCOMP™ Compound WF006H

LNP™ THERMOCOMP™ Compound PF00C - Europe

LNP™ THERMOCOMP™ Compound JF006E - Europe

LEXAN™ Copolymer FXE1414T - Americas

LNP™ ELCRES™ CRX9411

See all materials by this supplier

Properties

General

Property	Temperature	Value	Comment
Limiting oxygen index	23.0 °C	26 % Show Supplier Material materials with Limiting oxygen index of 26 %
Moisture absorption	23.0 °C	0.3 % Show Supplier Material materials with Moisture absorption of 0.3 %	ASTM D 570 \| (23°C/50% RH/24 hrs)
Relative density	23.0 °C	1.24 [-] Show Supplier Material materials with Relative density of 1.24 [-]	ASTM D 792 \|

Thermal

Property	Temperature	Value	Comment
Coefficient of thermal expansion	23.0 °C	5.6E-5 1/K Show Supplier Material materials with Coefficient of thermal expansion of 5.6E-5 1/K	ASTM D 696 \| -30°C to 30°C
Heat deflection temperature		174 °C Show Supplier Material materials with Heat deflection temperature of 174 °C
Heat deflection temperature, 1.80 MPa		174 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 174 °C	ASTM D 648 \| 3.2mm, unannealed

Electrical

Property	Temperature	Value	Comment
Dielectric strength	23.0 °C	130 kV/mm Show Supplier Material materials with Dielectric strength of 130 kV/mm	ASTM D 149 \| 1.6 mm
Dissipation factor, 1MHz	23.0 °C	6E-3 [-] Show Supplier Material materials with Dissipation factor, 1MHz of 6E-3 [-]	ASTM D 150 \|

Technological properties

Property
Application areas	Monitoring and Imaging, Medical Device
Availability	Europe,Asia,Americas
Processing methods	Drying Temperature: 120 to 150.0°C Drying Time: 4hrs Maximum Moisture Content: 0.05% Melt Temperature: 360 to 370.0°C Front - Zone 3 Temperature: 350 to 360.0°C Middle - Zone 2 Temperature: 340 to 350.0°C Rear - Zone 1 Temperature: 325 to 340.0°C Mold Temperature: 150°C Back Pressure: 0.2 to 0.3MPa Screw Speed: 30 to 60.0rpm
Supplier Disclaimer	While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.