LNP™ COLORCOMP™ Compound I1000

Want to keep this datasheet? Save it now in your required format

Description

LNP COLORCOMP I1000 is an unfilled Nylon 6/12

This material data has been provided by Sabic.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

All categories

Available suppliers

SABIC

MANUFACTURER, PROCESSOR AND DISTRIBUTOR

Additional services:

Our six Global Application Technology development hubs add value to our customers’ entire product development cycles in a wide range of industries. We provide our customers with advanced design, predictive engineering, testing, validation and processing services. Our COLORXPRESS™ services team provides global color matching and maintenance. Our Fast Formulation services provide initial assessments within five business days and custom-made samples typically in four to six weeks.

Materials by this supplier

LNP™ THERMOCOMP™ Compound WF006H

LNP™ THERMOCOMP™ Compound PF00C - Europe

LNP™ THERMOCOMP™ Compound JF006E - Europe

LEXAN™ Copolymer FXE1414T - Americas

LNP™ ELCRES™ CRX9411

See all materials by this supplier

Properties

General

Property	Temperature	Value	Comment
Limiting oxygen index	23.0 °C	27 % Show Supplier Material materials with Limiting oxygen index of 27 %
Relative density	23.0 °C	1.06 [-] Show Supplier Material materials with Relative density of 1.06 [-]	ASTM D 792 \|

Mechanical

Property	Temperature	Value	Comment
Elastic modulus	23.0 °C	2.4 GPa Show Supplier Material materials with Elastic modulus of 2.4 GPa	ISO 527 \| 1 mm/min
Elongation	23.0 °C	4.5 % Show Supplier Material materials with Elongation of 4.5 %	ISO 527 \| yield, 5 mm/min
Tensile strength	23.0 °C	62 MPa Show Supplier Material materials with Tensile strength of 62 MPa	ISO 527 \| yield, 5 mm/min

Thermal

Property	Value	Comment
Heat deflection temperature	62 - 135 °C Show Supplier Material materials with Heat deflection temperature of 62 - 135 °C
Heat deflection temperature, 0.45 MPa	135 °C Show Supplier Material materials with Heat deflection temperature, 0.45 MPa of 135 °C	ISO 75/Bf \| Flatw 80104 sp=64mm
Heat deflection temperature, 1.80 MPa	62 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 62 °C	ISO 75/Af \| Flatw 80104 sp=64mm

Electrical

Property	Temperature	Value	Comment
Dielectric constant, 100Hz	23.0 °C	3.6 [-] Show Supplier Material materials with Dielectric constant, 100Hz of 3.6 [-]	ASTM D 150
Dielectric constant, 1MHz	23.0 °C	3.2 [-] Show Supplier Material materials with Dielectric constant, 1MHz of 3.2 [-]	ASTM D 150
Dissipation factor, 100Hz	23.0 °C	0.02 [-] Show Supplier Material materials with Dissipation factor, 100Hz of 0.02 [-]	ASTM D 150
Dissipation factor, 100kHz	23.0 °C	0.01 [-] Show Supplier Material materials with Dissipation factor, 100kHz of 0.01 [-]	ASTM D 150
Dissipation factor, 1kHz	23.0 °C	0.02 [-] Show Supplier Material materials with Dissipation factor, 1kHz of 0.02 [-]	ASTM D 150
Sheet resistivity, ROA	23.0 °C	1.00E+12 Ω Show Supplier Material materials with Sheet resistivity, ROA of 1.00E+12 Ω	ASTM D 257
Volume resistivity	23.0 °C	1.00E+15 Ω·cm Show Supplier Material materials with Volume resistivity of 1.00E+15 Ω·cm	ASTM D 257

Rheological Properties

Property	Temperature	Value	Comment
Shrinkage	23.0 °C	1 % Show Supplier Material materials with Shrinkage of 1 %	ASTM D 955 \| 24 hrs
Shrinkage, transverse	23.0 °C	1 % Show Supplier Material materials with Shrinkage, transverse of 1 %	ASTM D 955 \| 24 hrs

Technological properties

Property
Availability	Europe,Asia,Americas
Processing methods	Drying Temperature: 80°C Drying Time: 4hrs Maximum Moisture Content: 0.12 to 0.2% Melt Temperature: 270 to 275.0°C Front - Zone 3 Temperature: 270 to 280.0°C Middle - Zone 2 Temperature: 260 to 270.0°C Rear - Zone 1 Temperature: 255 to 265.0°C Mold Temperature: 65 to 95.0°C Back Pressure: 0.2 to 0.3MPa Screw Speed: 30 to 60.0rpm
Supplier Disclaimer	While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.