General
Property | Temperature | Value | Comment |
---|---|---|---|
Coefficient of friction | 0.35 - 0.37 [-] Show Supplier Material materials with Coefficient of friction of 0.35 - 0.37 [-] | ||
Coefficient of friction, kinetic | 0.37 [-] Show Supplier Material materials with Coefficient of friction, kinetic of 0.37 [-] | ASTM D 3702 Modified: Manual | |
Coefficient of friction, static | 0.35 [-] Show Supplier Material materials with Coefficient of friction, static of 0.35 [-] | ASTM D 3702 Modified: Manual | |
Relative density | 23.0 °C | 1.45 [-] Show Supplier Material materials with Relative density of 1.45 [-] | ASTM D 792 | |
Mechanical
Property | Temperature | Value | Comment |
---|---|---|---|
Elastic modulus | 23.0 °C | 14 GPa Show Supplier Material materials with Elastic modulus of 14 GPa | ISO 527 | 1 mm/min |
Elongation | 23.0 °C | 1.6 % Show Supplier Material materials with Elongation of 1.6 % | ISO 527 | break, 5 mm/min |
Flexural modulus | 23.0 °C | 13.5 GPa Show Supplier Material materials with Flexural modulus of 13.5 GPa | ISO 178 | 2 mm/min |
Flexural strength | 23.0 °C | 276 MPa Show Supplier Material materials with Flexural strength of 276 MPa | ISO 178 |
Impact strength, Izod notched | 23.0 °C | 5 kJ/m² Show Supplier Material materials with Impact strength, Izod notched of 5 kJ/m² | ISO 180/1A | notched 80*10*4, 23°C |
Impact strength, Izod notched, ASTM | 23.0 °C | 69 J/m Show Supplier Material materials with Impact strength, Izod notched, ASTM of 69 J/m | ASTM D 256 | notched, 23°C |
Poisson's ratio | 23.0 °C | 0.4 [-] Show Supplier Material materials with Poisson's ratio of 0.4 [-] | ISO 527-1/2 |
Tensile strength | 23.0 °C | 181 MPa Show Supplier Material materials with Tensile strength of 181 MPa | ISO 527 | break, 5 mm/min |
Thermal
Rheological Properties
Property | Value | Comment |
---|---|---|
Melt volume-flow rate | 30 cm³/10min Show Supplier Material materials with Melt volume-flow rate of 30 cm³/10min | ASTM D 1238 | MVR at 300°C/5.0 kg |
Technological properties
Property | ||
---|---|---|
Application areas | Heavy Vehicles | |
Availability | Europe,Asia,Americas | |
Processing methods | Drying Temperature: 150°C | |
Supplier Disclaimer | While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right. |