NORYL™ Resin PX2630 - Asia

Want to keep this datasheet? Save it now in your required format

Description

NORYL™ PX2630 resin is a non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS). This high impact extrusion grade exhibits high impact strength, dimensional stability, hydrolytic stability, and very low moisture absorption. This material is an excellent candidate for industrial applications.

This material data has been provided by Sabic.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

All categories

Available suppliers

SABIC

MANUFACTURER, PROCESSOR AND DISTRIBUTOR

Additional services:

Our six Global Application Technology development hubs add value to our customers’ entire product development cycles in a wide range of industries. We provide our customers with advanced design, predictive engineering, testing, validation and processing services. Our COLORXPRESS™ services team provides global color matching and maintenance. Our Fast Formulation services provide initial assessments within five business days and custom-made samples typically in four to six weeks.

Applications

Mechanical Systems

Industrial Machinery

Materials by this supplier

LNP™ THERMOCOMP™ Compound WF006H

LNP™ THERMOCOMP™ Compound PF00C - Europe

LNP™ THERMOCOMP™ Compound JF006E - Europe

LEXAN™ Copolymer FXE1414T - Americas

LNP™ ELCRES™ CRX9411

See all materials by this supplier

Properties

General

Property	Temperature	Value	Comment
Relative density	23.0 °C	1.06 [-] Show Supplier Material materials with Relative density of 1.06 [-]	ASTM D 792 \|

Mechanical

Property	Temperature	Value	Comment
Elongation	23.0 °C	42 % Show Supplier Material materials with Elongation of 42 %	SABIC - Japan Method \| break
Flexural modulus	23.0 °C	2.1 GPa Show Supplier Material materials with Flexural modulus of 2.1 GPa	ASTM D 790
Flexural strength	23.0 °C	76 MPa Show Supplier Material materials with Flexural strength of 76 MPa	ASTM D 790
Impact strength, Izod notched	23.0 °C	330 kJ/m² Show Supplier Material materials with Impact strength, Izod notched of 330 kJ/m²	ASTM D 256 \| notched, 23°C
Impact strength, Izod notched, ASTM	23.0 °C	330 J/m Show Supplier Material materials with Impact strength, Izod notched, ASTM of 330 J/m	ASTM D 256
Tensile strength	23.0 °C	48 MPa Show Supplier Material materials with Tensile strength of 48 MPa	SABIC - Japan Method \| yield

Thermal

Property	Value	Comment
Heat deflection temperature	126 °C Show Supplier Material materials with Heat deflection temperature of 126 °C
Heat deflection temperature, 1.80 MPa	126 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 126 °C	ASTM D 648 \| 6.4 mm, unannealed

Rheological Properties

Property	Value	Comment
Melt mass-flow rate	3.8 g/10min Show Supplier Material materials with Melt mass-flow rate of 3.8 g/10min	ASTM D 1238 \| 250°C/10.0 kgf

Technological properties

Property
Application areas	Tray, Food Transportation, Industrial Material Handling
Availability	Asia
Supplier Disclaimer	While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.