NORYL™ Resin NH5110E - Europe

Want to keep this datasheet? Save it now in your required format

Description

NORYL™ NH5110E resin is a non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS). This extrusion grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of V1 at 1.5mm along with a Vicat B/120 temperature of 138C according to ISO 306. NORYL NH5110E resin was developed for low-beard growth during profile extrusion and is an excellent candidate for electrical conduit and cable management applications.

This material data has been provided by Sabic.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Available suppliers

SABIC

MANUFACTURER, PROCESSOR AND DISTRIBUTOR

Additional services:

Our six Global Application Technology development hubs add value to our customers’ entire product development cycles in a wide range of industries. We provide our customers with advanced design, predictive engineering, testing, validation and processing services. Our COLORXPRESS™ services team provides global color matching and maintenance. Our Fast Formulation services provide initial assessments within five business days and custom-made samples typically in four to six weeks.

Applications

Electrical Engineering

Construction

Water Management

Materials by this supplier

LNP™ THERMOCOMP™ Compound WF006H

LNP™ THERMOCOMP™ Compound PF00C - Europe

LNP™ THERMOCOMP™ Compound JF006E - Europe

LEXAN™ Copolymer FXE1414T - Americas

LNP™ ELCRES™ CRX9411

See all materials by this supplier

Properties

General

Property	Temperature	Value	Comment
Density	23.0 °C	1.09 g/cm³ Show Supplier Material materials with Density of 1.09 g/cm³	ISO 1183
Limiting oxygen index	23.0 °C	34 % Show Supplier Material materials with Limiting oxygen index of 34 %
Moisture absorption	23.0 °C	0.06 % Show Supplier Material materials with Moisture absorption of 0.06 %	ISO 62 \| (23°C / 50% RH)
Water absorption	23.0 °C	0.15 % Show Supplier Material materials with Water absorption of 0.15 %	ISO 62-1 \| (23°C/saturated)

Mechanical

Property	Temperature	Value	Comment
Elastic modulus	23.0 °C	2.5 GPa Show Supplier Material materials with Elastic modulus of 2.5 GPa	ISO 527 \| 1 mm/min
Elongation	23.0 °C	4 % Show Supplier Material materials with Elongation of 4 %	ISO 527 \| yield, 50 mm/min
Flexural modulus	23.0 °C	2.4 GPa Show Supplier Material materials with Flexural modulus of 2.4 GPa	ISO 178 \| 2 mm/min
Flexural strength	23.0 °C	98 MPa Show Supplier Material materials with Flexural strength of 98 MPa	ISO 178 \| yield, 2 mm/min
Impact strength, Charpy notched	23.0 °C	26 kJ/m² Show Supplier Material materials with Impact strength, Charpy notched of 26 kJ/m²	ISO 179/1eA \| V-notch Edgew, 23°C, 80104 sp=62mm
Impact strength, Izod notched	23.0 °C	9 kJ/m² Show Supplier Material materials with Impact strength, Izod notched of 9 kJ/m²	ISO 180/1A \| notched 80104, -30°C
Tensile strength	23.0 °C	64 MPa Show Supplier Material materials with Tensile strength of 64 MPa	ISO 527 \| yield, 50 mm/min

Thermal

Property	Temperature	Value	Comment
Ball Pressure Test		Pass	IEC 60695-10-2 \| 125°C +/- 2°C
Coefficient of thermal expansion	23.0 °C	8.2E-5 1/K Show Supplier Material materials with Coefficient of thermal expansion of 8.2E-5 1/K	ISO 11359-2 \| 23°C to 80°C
Coefficient of thermal expansion, transverse	23.0 °C	9.4E-5 1/K Show Supplier Material materials with Coefficient of thermal expansion, transverse of 9.4E-5 1/K	ISO 11359-2 \| 23°C to 80°C
Heat deflection temperature		114 - 129 °C Show Supplier Material materials with Heat deflection temperature of 114 - 129 °C
Heat deflection temperature, 0.45 MPa		129 °C Show Supplier Material materials with Heat deflection temperature, 0.45 MPa of 129 °C	ISO 75/Be \| Edgew 120104 sp=100mm
Heat deflection temperature, 1.80 MPa		114 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 114 °C	ISO 75/Af \| Flatw 80104 sp=64mm
Relative temperature index, electrical		65 °C Show Supplier Material materials with Relative temperature index, electrical of 65 °C	UL 746B
Relative temperature index, mechanical impact		65 °C Show Supplier Material materials with Relative temperature index, mechanical impact of 65 °C	UL 746B
Relative temperature index, mechanical strength		65 °C Show Supplier Material materials with Relative temperature index, mechanical strength of 65 °C	UL 746B
Vicat softening temperature		149 °C Show Supplier Material materials with Vicat softening temperature of 149 °C	ISO 306 \| Rate B/50
Flammability	UL Recognized, 94V-1 Flame Class Rating: 1.5mm UL 94 <br> UL Yellow Card Link: https://iq.ul.com/ul/cert.aspx?ULID=100158340- -

Electrical

Property	Temperature	Value	Comment
Dielectric constant, 1MHz	23.0 °C	2.6 [-] Show Supplier Material materials with Dielectric constant, 1MHz of 2.6 [-]	IEC 60250
Dielectric strength	23.0 °C	46 kV/mm Show Supplier Material materials with Dielectric strength of 46 kV/mm	IEC 60243-1 \| shorttime, 1.0mm
Dissipation factor, 1MHz	23.0 °C	1.7E-3 [-] Show Supplier Material materials with Dissipation factor, 1MHz of 1.7E-3 [-]	IEC 60250

Rheological Properties

Property	Value	Comment
Melt volume-flow rate	9 cm³/10min Show Supplier Material materials with Melt volume-flow rate of 9 cm³/10min	ISO 1133 \| MVR at 280°C/5.0 kg

Technological properties

Property
Application areas	Pipe/Fitting, Enclosures
Availability	Europe
Processing methods	Drying Time: 2 to 3.0hrs Adapter Temperature: 240 to 260.0°C Barrel - Zone 2 Temperature: 230 to 250.0°C Die Temperature: 240 to 260.0°C Hopper Temperature: 40 to 60.0°C Melt Temperature: 240 to 260.0°C Barrel - Zone 3 Temperature: 240 to 260.0°C Drying Temperature: 80 to 90.0°C Barrel - Zone 1 Temperature: 220 to 240.0°C Barrel - Zone 4 Temperature: 240 to 260.0°C Calibrator Temperature: 50 to 70.0°C
Supplier Disclaimer	While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.