ULTEM™ Resin CRS5001 - Americas

Want to keep this datasheet? Save it now in your required format

Description

Transparent, Standard flow Polyetherimide copolymer (Tg 225C) with enhanced chemical resistance to strong acids, bases, aromatics, and ketones. ECO conforming, UL94 V0 listing.

This material data has been provided by Sabic.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

All categories

Available suppliers

SABIC

MANUFACTURER, PROCESSOR AND DISTRIBUTOR

Additional services:

Our six Global Application Technology development hubs add value to our customers’ entire product development cycles in a wide range of industries. We provide our customers with advanced design, predictive engineering, testing, validation and processing services. Our COLORXPRESS™ services team provides global color matching and maintenance. Our Fast Formulation services provide initial assessments within five business days and custom-made samples typically in four to six weeks.

Applications

Automotive

General Automotive Parts

Automotive Interior

Commercial Vehicles

Trucks & Trailers

Buses

Railway

Aerospace

Aerospace Materials

Aircraft Interiors

Defense

Show all

Materials by this supplier

LNP™ THERMOCOMP™ Compound WF006H

LNP™ THERMOCOMP™ Compound PF00C - Europe

LNP™ THERMOCOMP™ Compound JF006E - Europe

LEXAN™ Copolymer FXE1414T - Americas

LNP™ ELCRES™ CRX9411

See all materials by this supplier

Properties

General

Property	Temperature	Value	Comment
Water absorption	23.0 °C	0.16 % Show Supplier Material materials with Water absorption of 0.16 %	ASTM D 570 \| (23°C/24hrs)

Mechanical

Property	Temperature	Value	Comment
Elastic modulus	23.0 °C	2.9 GPa Show Supplier Material materials with Elastic modulus of 2.9 GPa	ASTM D 638 \| 5 mm/min
Elongation	23.0 °C	60 % Show Supplier Material materials with Elongation of 60 %	ASTM D 638 \| brk, Type I, 5 mm/min
Flexural modulus	23.0 °C	3.1 GPa Show Supplier Material materials with Flexural modulus of 3.1 GPa	ASTM D 790 \| 2.6 mm/min, 100 mm span
Flexural strength	23.0 °C	137 MPa Show Supplier Material materials with Flexural strength of 137 MPa	ASTM D 790 \| yld, 2.6 mm/min, 100 mm span
Impact strength, Izod notched	23.0 °C	64 kJ/m² Show Supplier Material materials with Impact strength, Izod notched of 64 kJ/m²	ASTM D 256 \| notched, 23°C
Tensile strength	23.0 °C	99 MPa Show Supplier Material materials with Tensile strength of 99 MPa	ASTM D 638 \| yld, Type I, 5 mm/min

Thermal

Property	Value	Comment
Heat deflection temperature	207 °C Show Supplier Material materials with Heat deflection temperature of 207 °C
Heat deflection temperature, 1.80 MPa	207 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 207 °C	ASTM D 648 \| 6.4 mm, unannealed
Relative temperature index, electrical	160 °C Show Supplier Material materials with Relative temperature index, electrical of 160 °C	UL 746B
Relative temperature index, mechanical impact	160 °C Show Supplier Material materials with Relative temperature index, mechanical impact of 160 °C	UL 746B
Relative temperature index, mechanical strength	160 °C Show Supplier Material materials with Relative temperature index, mechanical strength of 160 °C	UL 746B
Flammability	UL Recognized, 94V-0 Flame Class Rating: ≥1.5mm UL 94 <br> UL Yellow Card Link: https://iq.ul.com/ul/cert.aspx?ULID=221114- -

Electrical

Property	Temperature	Value	Comment
Comparative tracking index	23.0 °C	4 V Show Supplier Material materials with Comparative tracking index of 4 V	UL 746A \| (UL) {PLC}
Dielectric strength	23.0 °C	17.9 kV/mm Show Supplier Material materials with Dielectric strength of 17.9 kV/mm	ASTM D 149 \| in oil, 3.2 mm
High Amp Arc Ignition	23.0 °C	1.5 mm Show Supplier Material materials with High Amp Arc Ignition of 1.5 mm	≥, UL 746A \| PLC 0
High Volt Arc Track Rate	23.0 °C	3 PLC Code Show Supplier Material materials with High Volt Arc Track Rate of 3 PLC Code	UL 746A \| (PLC)
Hot-Wire Ignition	23.0 °C	1.5 mm Show Supplier Material materials with Hot-Wire Ignition of 1.5 mm	≥, UL 746A \| PLC 0
Sheet resistivity, ROA	23.0 °C	5.80E+16 Ω Show Supplier Material materials with Sheet resistivity, ROA of 5.80E+16 Ω	ASTM D 257
Volume resistivity	23.0 °C	1.10E+17 Ω·cm Show Supplier Material materials with Volume resistivity of 1.10E+17 Ω·cm	ASTM D 257

Rheological Properties

Property	Temperature	Value	Comment
Shrinkage	23.0 °C	0.4 % Show Supplier Material materials with Shrinkage of 0.4 %	SABIC method \| 3.2 mm

Technological properties

Property
Application areas	Medical Device, LED Lighting, Meter Water, Photovoltaic Components, Semiconductor, Wireless Communications, Audio, Aerospace, Air Cabin Interiors, Electronic Components, Enclosure/Housing/Cover, Energy Management, Enclosures, Industrial Material Handling, Heavy Vehicles
Availability	Europe,Asia,Americas
Processing methods	Shot to Cylinder Size: 40 to 60.0% Drying Time (Cumulative): 24hrs Melt Temperature: 365 to 390.0°C Vent Depth: 0.025 to 0.076mm Rear - Zone 1 Temperature: 345 to 365.0°C Middle - Zone 2 Temperature: 355 to 375.0°C Back Pressure: 0.3 to 0.7MPa Screw Speed: 40 to 70.0rpm Drying Time: 4 to 6.0hrs Nozzle Temperature: 360 to 380.0°C Mold Temperature: 135 to 165.0°C Front - Zone 3 Temperature: 365 to 390.0°C Maximum Moisture Content: 0.02% Drying Temperature: 150°C
Supplier Disclaimer	While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.